Filter
Top Products
Chapter 10: Using Effects
ANDROMEDA A6 REFERENCE MANUAL 241241
Table of Digital Effects Parameters (continued)
CONFIG DISPLAY
PARAMETER
NAME
MOD
PAGE
DISPLAY
PARAMETER NAME RANGE
Room + Chorus
➟
CONFIG SEND
Send (Input Level from Voice) 0.00-100.00
BLEND
Input Blend ±100.00
RM OUT
Room Output Level 0 - 100%
CH OUT
Chorus Output Level 0 - 100%
ROOM1 DECAY
Room Reverb Decay Time 1.00 –81.53 secs.
LPF
Room Input Low-Pass Filter off, 29Hz - 41.3KHz
PDTIME
Room Pre-Delay Time 0 - 250 msec
PDMIX
Room Pre-Delay Mix 0 - 100%
ROOM2 DENS
Room Reverb Density 0 - 100%
DIFF
Room Reverb Diffusion 0 - 100%
HOLD
Room Gate Hold Time 0 - 500 msec
CHORS1 LRATE
Chorus/Flange Rate (1
st
tap) 0 – 6.477 Hz
LDEPTH
Chorus/Flange Depth 0 - 250
LFDBK
Chorus/Flange Feedback – 99% to + 99%
LPDTIM
Pre-Delay Time 0 - 250 msec
CHORS2 RRATE
Chorus/Flange Rate (2
nd
tap) 0 – 6.477 Hz
RDEPTH
Chorus/Flange Depth 0 - 250
RFDBK
Chorus/Flange Feedback – 99% to + 99%
RPDTIM
Pre-Delay Time 0 - 250 msec
CHORS3 LPF
Chorus Input Low Pass Filter off, 29Hz - 41.3KHz
FBHPF
Chorus Feedback High-Pass
Filter
off, 29Hz - 41.3KHz
FBLPF
Chorus Feedback Low-Pass
Filter
off, 29Hz - 41.3KHz
Room + Flange
➟
CONFIG SEND
Send (Input Level from Voice) 0.00-100.00
BLEND
Input Blend ±100.00
RM OUT
Room Output Level 0 - 100%
FL OUT
Flange Output Level 0 - 100%
ROOM1 DECAY
Room Reverb Decay Time 1.00 –81.53 secs.
LPF
Room Input Low-Pass Filter off, 29Hz - 41.3KHz
PDTIME
Room Pre-Delay Time 0 - 250 msec
PDMIX
Room Pre-Delay Mix 0 - 100%
ROOM2 DENS
Room Reverb Density 0 - 100%
DIFF
Room Reverb Diffusion 0 - 100%
HOLD
Room Gate Hold Time 0 - 500 msec
FLANG1 RATE
Chorus/Flange Rate (1
st
tap) 0 – 6.477 Hz
DEPTH
Chorus/Flange Depth 0 - 250
FDBK
Chorus/Flange Feedback – 99% to + 99%
PDTIM
Pre-Delay Time 0 - 250 msec
THRU0
Through Zero ON/OFF
LPF
Flange Input Low Pass Filter off, 29Hz - 41.3KHz
FLANG2 FBHPF
Flange Feedback High-Pass
Filter
off, 29Hz - 41.3KHz
FBLPF
Flange Feedback Low-Pass
Filter
off, 29Hz - 41.3KHz
TRIG
Triggered Flange Input Monitor Off, Left, Right, L&R
ATTACK
Trigger Attack Threshold (start) 0 - 255
RELEAS
Trigger Release Threshold 0 - 255