Filter
Top Products
Chapter 10: Using Effects
238 ANDROMEDA A6 REFERENCE MANUAL
Table of Digital Effects Parameters (continued)
CONFIG DISPLAY
PARAMETER
NAME
MOD
PAGE
DISPLAY
PARAMETER NAME RANGE
Delay > Room
➟
CONFIG SEND Send (Input Level from Voice) 0.00-100.00
MIX Input Mix of Room 0.00-100.00
OUT Effect Chain Output Level 0 - 100%
DELAY1 100MS Delay Time Hundreds of
milliseconds
0 - 24
10MS Delay Time Tens Digit 0 - 9
1MS Delay Time Ones Digit 0 - 9
FDBK Delay Feedback – 99% to + 99%
DELAY2 LOCUT Low Frequency Cutoff off, 29Hz - 41.3KHz
HICUT Hi Frequency Cutoff off, 29Hz - 41.3KHz
DENS Reflection Density 0 - 100%
RATE Delay Modulation Rate 0 - 6.47Hz
DEPTH Delay Modulation Depth 0 - 250 msec
DELAY3 TREMR Tremelo Rate 0 - 6.47Hz
TREMD Tremelo Depth 0 - 100%
PANR Pan Rate 0 - 6.47Hz
PAND Pan Depth 0 - 100%
ROOM1 DECAY Room Reverb Decay Time 1.00 - 75.8 sec
LPF Room Input Low-Pass Filter off, 29Hz - 41.3KHz
DENS Room Reverb Density 0 - 100%
DIFF Room Reverb Diffusion 0 - 100%
ROOM2 GATE Room Gate Level 0 - 100
HOLD Room Gate Hold Time 0 - 500 msec
RELEAS Room Gate Release Time 0 - 500 msec
Chorus > Room
➟
CONFIG SEND Send (Input Level from Voice) 0.00-100.00
MIX Input Mix of Room 0.00-100.00
OUT Effect Chain Output Level 0 - 100%
CHORS1 LRATE Chorus/Flange Rate (Left) 0 – 6.477 Hz
LDEPTH Chorus/Flange Depth 0 - 250
LFDBK Chorus/Flange Feedback – 99% to + 99%
LPDLY Pre-Delay Time 0 - 250 msec
CHORS2 RRATE Chorus/Flange Rate (Right) 0 – 6.477 Hz
RDEPTH Chorus/Flange Depth 0 - 250
RFDBK Chorus/Flange Feedback – 99% to + 99%
RPDLY Pre-Delay Time 0 - 250 msec
CHORS3 CLPF Chorus Input Low Pass Filter off, 29Hz - 41.3KHz
CFBHPF Chorus Feedback High-Pass
Filter
off, 29Hz - 41.3KHz
CFBLPF Chorus Feedback Low-Pass
Filter
off, 29Hz - 41.3KHz
ROOM1 DECAY Room Reverb Decay Time 100 -8153
RLPF Room Input Low-Pass Filter off, 29Hz - 41.3KHz
PDTIME Room Pre-Delay Time 0 - 250 msec
PDMIX Room Pre-Delay Mix 0 - 100%
ROOM2 DENS Room Reverb Density 0 - 100%
DIFF Room Reverb Diffusion 0 - 100%
GATE Room Gate Hold Time 0 - 500 msec