Filter
Top Products
Chapter 10: Using Effects
236 ANDROMEDA A6 REFERENCE MANUAL
Table of Digital Effects Parameters (continued)
CONFIG DISPLAY
PARAMETER
NAME
MOD
PAGE
DISPLAY
PARAMETER NAME RANGE
Quad Chorus
➟
CONFIG SEND Send (Input Level from Voice) 0.00-100.00
PAN Input Pan -100.0- +100.00
OUT Effects Output Level 0 - 100%
PARAM1 1RATE Chorus/Flange Rate (1
st
tap) 0 – 6.477 Hz
1DEPTH Chorus/Flange Depth 0 - 250
1FDBK Chorus/Flange Feedback – 99% to + 99%
1WAVE Modulation LFO type TRIANGLE or SINE
1PDTIM Pre-Delay Time 0 - 250 msec
PARAM2 2RATE Chorus/Flange Rate (2
nd
tap) 0 – 6.477 Hz
2DEPTH Chorus/Flange Depth 0 - 250
2FDBK Chorus/Flange Feedback – 99% to + 99%
2WAVE Modulation LFO type TRIANGLE or SINE
2PDTIM Pre-Delay Time 0 - 250 msec
PARAM3 3RATE Chorus/Flange Rate (3
rd
tap) 0 – 6.477 Hz
3DEPTH Chorus/Flange Depth 0 - 250
3FDBK Chorus/Flange Feedback – 99% to + 99%
3WAVE Modulation LFO type TRIANGLE or SINE
3PDTIM Pre-Delay Time 0 - 250 msec
PARAM4 4RATE Chorus/Flange Rate (4
th
tap) 0 – 6.477 Hz
4DEPTH Chorus/Flange Depth 0 - 250
4FDBK Chorus/Flange Feedback – 99% to + 99%
4WAVE Modulation LFO type TRIANGLE or SINE
4PDTIM Pre-Delay Time 0 - 250 msec
PARAM5 WIDTH Quad Chorus Stereo Width ± 99
2LEVEL Out Level of 2
nd
Chorus 0 - 99
3LEVEL Out Level of 3
rd
Chorus 0 - 99
Chorus:Chorus
➟
CONFIG SEND Send (Input Level from Voice) 0.00-100.00
PAN Input Pan -100.0- +100.00
OUT L Left Chorus Output Level 0 - 100%
OUT R Right Chorus Output Level 0 - 100%
L-CHRS1 RATE Chorus/Flange Rate (Left) 0 – 6.477 Hz
DEPTH Chorus/Flange Depth 0 - 250
FDBK Chorus/Flange Feedback – 99% to + 99%
PDTIM Pre-Delay Time 0 - 250 msec
L-CHRS2 LPF Input Low Pass Filter off, 29Hz - 41.3KHz
FBHPF Feedback High-Pass Filter off, 29Hz - 41.3KHz
FBLPF Feedback Low-Pass Filter off, 29Hz - 41.3KHz
WAVE Modulation LFO type TRIANGLE or SINE
THRU0 Through Zero ON/OFF
R-CHRS1 RATE Chorus/Flange Rate (Left) 0 – 6.477 Hz
DEPTH Chorus/Flange Depth 0 - 250
FDBK Chorus/Flange Feedback – 99% to + 99%
PDTIM Pre-Delay Time 0 - 250 msec
R-CHRS2 LPF Input Low Pass Filter off, 29Hz - 41.3KHz
FBHPF Feedback High-Pass Filter off, 29Hz - 41.3KHz
FBLPF Feedback Low-Pass Filter off, 29Hz - 41.3KHz
WAVE Modulation LFO type TRIANGLE or SINE
THRU0 Through Zero ON/OFF