Filter
Top Products
101
MR16 Owner’s Manual (MIDI synchronization)
6) Rotate the [MENU/ENTER] knob to select the
desired frame rate, and press the [MENU/ENTER]
knob.
The selected frame rate is now effective, while
"MTC FrameRate=**" is highlighted on the screen.
7) Press the [STOP] key to exit the menu mode.
5) Rotate the [MENU/ENTER] knob to select
"MTC FrameRate=**", and press the [MENU/ENTER]
knob.
The current option (the default is "25") flashes.
You can now select the desired frame rate (the
options are "24", "25", "30nd" and "30df").
The current option (the default is "Off") flashes.
You can now select the desired option (the
available options are Off, CLK and MTC).
Off
CLK
MTC
No signal is output from the [MIDI OUT]
connector. This is the default.
MIDI clock with Song Position Pointer is
output from the [MIDI OUT] connector.
MIDI time code is output from the [MIDI
OUT] connector.
4) Rotate the [MENU/ENTER] knob to select "MTC",
and press the [MENU/ENTER] knob.
"Midi Sync Out" is now set to "MTC", while
"Midi Sync Out" is highlighted on the screen.
While the MR16 is stopped, you can set the reference of MIDI synchronization to "MTC" and the MTC
frame rate appropriately to match the sequencer.
2) Rotate the [MENU/ENTER] knob to select
"System
", and press the [MENU/ENTER] knob.
The display now shows the first page of the
system menu screen, where "
Back" is
highlighted initially.
<MTC start time>:
The MTC from the MR16 has one hour offset to the ABS time (the offset value is fixed).
Therefore, when you start the MR16 from the beginning of a song (ABS ZERO), the MTC starts
from "01h 00m 00s 00f".
1) While the recorder is stopped, press the
[MENU/ENTER] knob to enter the menu mode.
The display now shows the first page of the
menu selection screen, where "
Back" is
highlighted initially (selecting "
Back" returns
to the previous screen).
MIDI sync/MTC frame rate settings
3) Rotate the [MENU/ENTER] knob to select
"Midi Sync Out=***", and press the [MENU/ENTER]
knob.
Flashing
Flashing