Filter
Top Products
68
MR16 Owner’s Manual (Using effects)
• Details of each mic simulation effect
DYNAMIC
CONDENSER
TUBE
Simulates the sound of a popular dy-
namic microphone.
Simulates the sound of a popular con-
denser microphone for professional use.
Simulates the sound of a popular tube
microphone for professional use.
• Amp simulation effects details
BRIT STACK
US METAL
60’s COMBO
Simulates a popular British 800-series
tube guitar amp head.
Simulates a popular US high gain metal
guitar amplifier.
Simulates a popular tube combo guitar
amplifier.
Using the insert effects for recording
The insert effects can be applied only to the Input A channel.
The insert effects include the mic simulation and amplifier simulation effects, which simulate
popular microphones and guitar amplifiers. Depending on the setting of the [INPUT A SEL] switch
on the rear panel, the appropriate simulation effect (mic simulation or amplifier simulation) is
applied.
If you use the microphone simulation effect when you record an acoustic guitar through your
microphone, you can make recording as if you are using a famous microphone. If you use the
guitar amplifier simulation effect when you record an electric guitar directly connected to the
MR16, you can make recording as if you are using a famous guitar amplifier.
Note that you cannot get exactly the same sound as the original microphone/guitar amplifier by
using simulation effects.
You can use mic simulation effects when the
[INPUT A SEL] switch on the rear panel is set
to "MIC/LINE".
MIC/LINE
Mic simulation effects
Amp simulation effects
GTR DIST
GTR CLEAN
You can use mic simulation effects when the
[INPUT A SEL] switch on the rear panel is set
to "GTR DIST" or "GTR CLEAN". Only when the
switch is set to "GTR DIST", you can also use
the distortion (adjusted by the [DISTORTION]
control), as well as the insert effects.
USB
USB HOST
MIDI OUT
DIGITAL OUT
FOOT SW
INPUT A SEL
GTR CLEAN
MIC/LINE
GTR DIST
INPUT A SEL
GTR CLEAN
MIC/LINE
GTR DIST
SIMULATION
SIMULATION
AMP
MIC
DYNAMIC BRIT STACK
CONDENSER
US METAL
TUBE
60'S COMBO
When the mic
simulation effect
is enabled, you
can select the
type from DY-
NAMICS, CON-
DENSER and
TUBE. The key
for the selected
type is lit.
When the ampli-
fier simulation ef-
fect is enabled,
you can select
the type from
BRIT STACK,
US METAL and
60'S COMBO.
The key for the
selected type is
lit.
INPUT A SEL
GTR CLEAN
MIC/LINE
GTR DIST
INPUT A SEL
GTR CLEAN
MIC/LINE
GTR DIST
INPUT A SEL
GTR CLEAN
MIC/LINE
GTR DIST