Filter
Top Products
136
MR16 Owner’s Manual (Part editing)
5) Rotate the [MENU/ENTER] knob to select
"Change Part
" in the second page, and press
the [MENU/ENTER] knob.
The display now shows the screen for
selecting the source track(s) and destination
track(s) of the exchange operation.
6) Rotate the [MENU/ENTER] knob to select
"Source Track=*", and press the [MENU/ENTER]
knob.
You can now select the exchange source track(s)
by rotating the [MENU/ENTER] knob.
The available options are:
• 1 through 8 (mono track)
• 1/2, 3/4, 5/6, 7/8, 9/10, 11/12, 13/14 and 15/16
(stereo tracks)
1) Load the song you want to edit.
2) Set the LOCATE A and LOCATE B points (see
page 53).
You can check the parts by playing back
between the LOCATE A and LOCATE B points
(see page 48).
3) While the recorder is stopped, press the
[MENU/ENTER] knob to enter the menu mode.
The display now shows the first page of the
menu selection screen.
You can exchange the parts between the desired tracks. The part exchange operation can be
made only within the current song.
<Note>:
You cannot exchange data of a song pro-
tected. Release the protection before exchanging
parts.
4) Rotate the [MENU/ENTER] knob to select
"Part Edit
", and press the [MENU/ENTER] knob.
The display now shows the part edit menu
screen.
Exchange the part(s)
Locate A point
Locate B point
ABS ZERO
REC END
You can exchange the
desired parts between
the desired track(s)
Flashing