Filter
Top Products
124
MR16 Owner’s Manual (Track editing)
<Note>:
If you want to cancel the move opera-
tion, move the cursor to "
[CANCEL]
" on the
screen, and press the [
MENU/ENTER
] knob.
<Note>:
If a destination track has recorded
data, moving data overwrites the previous
data.
<Note>:
You cannot select the same track(s)
for the move source and destination.
You can select the same number of tracks as
the move source track(s). For example, if you
select a mono track for the move source, you
can only select a mono for the move destina-
tion.
8) Rotate the [MENU/ENTER] knob to move the
cursor to "[ENTER]" on the screen, and press the
[MENU/ENTER] knob.
The display shows "Please Wait", immediately
followed by "Completed" when the MR16
completes the move operation.
7) Rotate the [MENU/ENTER] knob to select
destination track(s), and press the
[MENU/ENTER] knob.
“Dest. Track = *” is now highlighted on the screen.
Flashing
5) Rotate the [MENU/ENTER] knob to select "Source
Track = *", and press the [MENU/ENTER] knob.
You can now select the desired move source
track(s) by rotating the [MENU/ENTER] knob.
The available options are:
6) Rotate the [MENU/ENTER] knob to select source
track(s), and press the [MENU/ENTER] knob.
You can now select the desired destination
track(s).
4) Rotate the [MENU/ENTER] knob to select
"Move Track
", and press the [MENU/ENTER] knob.
The display now shows the screen for selecting
the source track(s) and destination track(s) of
the move operation. "Source Track" selects the
move source track(s), while "Dest. Track" selects
the move destination track(s).
Flashing
Flashing
Flashing
• 1 through 8 (mono track)
• 1/2, 3/4, 5/6, 7/8, 9/10, 11/12, 13/14 and 15/16
(stereo tracks)