Filter
Top Products
70
MR16 Owner’s Manual (Using effects)
Selecting an effect type
The MR16 has the original built-in reverb/delay processor featuring the newly-developed algo-
rithm. You can apply the reverb or delay to playback signals of tracks 1 through 8 during
mixdown and track bouncing.
Details of each effect type
ROOM
HALL
PLATE
DELAY
Simulates reverberation in a medium-sized room. When you select "ROOM", you can adjust the
reverb time using the [REVERB/DELAY TIME] control.
Simulates reverberation in a hall with moderate early reflection.
When you select "HALL", you can adjust the reverb time using the [REVERB/DELAY TIME]
control.
Simulates a plate reverb with a wide frequency range.
When you select "PLATE", you can adjust the reverb time using the [REVERB/DELAY TIME]
control.
Adds delay effects. You can select the desired delay types using the "Delay Type" item of the
System menu in the menu mode (you can easily access to the "Delay Type" setting screen by a
long press of the [DELAY] key).
Three delay types are available: Mono, L-R and Diff. See below for details.
When you select "ROOM", you can adjust the delay time using the [REVERB/DELAY TIME]
control.
You can select an effect type from among three reverb options (ROOM, HALL and PLATE) and a
delay (DELAY) by using the keys in the [EFFECT] section shown below (the currently selected key
is lit).
Using the internal reverb or delay
PEAK
GUITAR
MIN
DISTORTION
MAX
LINE MIC
TRIM
INSERT/GUITAR
UNBAL
BALBALBALBAL
INPUT A INPUT B INPUT C INPUT D
VOLUME
MIN
MAX
PEAK
LINE
TRIM
MIC
UNBAL
POWER
UNBAL
MIC
TRIM
LINE
PEAK
UNBAL
MIC
TRIM
LINE
PEAK
R
L
100
SIMULATION
SIMULATION
AMP
MIC
010
LR
010
LR
RL
100
010
LR
RL
100
RL
100
010
LR
UNDO/REDO
STORE
BOUNCE
MASTERING
BRIGHT
15/16 > STEREO WAV FILE
NATURAL
POWERFUL
B / OUTA / INPLAY MODEAUTO PUNCH
LOCATE
EFFECT
DELAYPLATEHALLROOM
BOUNCE MODE
CONTRAST
TIMEBASE SELECT
RHYTHM GUIDE DIRECT LOCATE
EFFECT SEND
PAN
INPUT EQ
TO STEREO BUSS LEVEL
MENU / ENTER
MIN MAX
MIN
MAX
REVERB / DELAY TIME
L
STEREO OUT
R
1
AUX OUT
2
1
PHONES
2
DYNAMIC BRIT STACK
INPUT A INPUT B INPUT C INPUT D
EFFECT
DELAYPLATEHALLROOM
MIN MAX
REVERB / DELAY TIME
Select this when
you want to use
a room reverb.
Select this when
you want to use
a hall reverb.
Select this when
you want to use
a plate reverb.
Select this when
you want to use
a delay effect.