Filter
Top Products
123
MR16 Owner’s Manual (Track editing)
9) Press the [MENU/ENTER] knob.
The display now returns to the track edit menu
screen, where “Copy-Paste Trk
” is highlighted.
10) Press the [STOP] key to exit the menu mode.
<Note>:
If a destination track has recorded
data, pasting the copied data overwrites the
previous data.
<Note>:
If you want to cancel the copy/paste
operation, move the cursor to "
[CANCEL]
" on
the screen, and press the [
MENU/ENTER
]
knob.
<Note>:
If you are not satisfied with the re-
sult, press the [
UNDO/REDO
] key to undo the
operation (see page 119).
You can move whole data (from ABS ZERO to REC END) of the desired track(s) to the other
desired track(s). After the data is moved, the original track(s) is(are) silent. You can only move
track data within the current song.
Moving track data
Trk 1
Trk 2
Trk 3 Trk 4 Trk 5
Trk 6
Trk 7 Trk 8 Trk 9 Trk 10 Trk 11 Trk 12 Trk 13 Trk 14 Trk 15 Trk 16
Trk 1
Trk 2
Trk 3 Trk 4 Trk 5
Trk 6
Trk 7 Trk 8 Trk 9 Trk 10 Trk 11 Trk 12 Trk 13 Trk 14 Trk 15 Trk 16
A
B
A
B
<Note>:
Unlike the copy/paste operation, the data
on the source track(s) disappears after the move
operation.
1) Load the song you want to edit.
2) While the recorder is stopped, press the
[MENU/ENTER] knob to enter the menu mode.
The display now shows the first page of the
menu selection screen.
3) Rotate the [MENU/ENTER] knob to select
"Track Edit ", and press the [MENU/ENTER] knob.
The display now shows the track edit menu
screen.
<Note>:
You cannot move track data of a song pro-
tected. Release the protection before moving track
data.
Moving data of tracks 1/2 to tracks 7/8.