Filter
Top Products
106
MR16 Owner’s Manual (Data export to a personal computer)
<Editing a file name>
You can edit a file name by the follow-
ing procedure.
2) Enter a new name using the character
entry keys.
Pressing a different character entry key
automatically moves the cursor right.
If two successive characters are assigned
to the same character entry key, rotate
the [MENU/ENTER] knob after selecting
the first character to move the cursor
right.
3) After entering a new name, press the
[MENU/ENTER] knob.
The entered name is set and the display
returns to the previous screen.
The screen example below shows the
name is set to "Original Name".
While the rightmost character is flash-
ing, pressing the [DELETE] key repeat-
edly deletes the current file name.
Flashing
1) After selecting the range of track data to
be converted, rotate the [MENU/ENTER]
knob to move the cursor to "NAME" and
press the [MENU/ENTER] knob.
The rightmost character of the file name
starts flashing. You can now start
editing.
Then, by pressing the [MENU/ENTER] knob
while holding down the [RECORD] key to carry
out the WAV file conversion.