Filter
Top Products
58
MR16 Owner’s Manual (Advanced playback and locate functions)
Previewing the locate point
After executing direct locate function, pressing the [PLAY] key (or [RECORD] key) plays
back two seconds after (or before) the locate point (preview function). The preview time is
set to two seconds by default, however, you can set it to a desired time between one and
four seconds.
Previewing after the locate point
While the direct locate screen is shown, pressing the [PLAY] key executes preview play-
back from the locate point for a few seconds (set by the preview time).
The display shows " " during preview playback. To stop preview play-
back during preview playback, press the [STOP] key.
Previewing before the locate point
While the direct locate screen is shown, pressing the [RECORD] key executes preview
playback from a few seconds (set by the preview time) before the locate point to the
locate point. The display shows " " during preview playback.
To stop preview playback during preview playback, press the [STOP] key.
Setting the preview time
While the direct locate screen is shown, each press of the [PLAY MODE] key switches the
preview time (indicated by an arrow in the screen example below) between "1s", "2s",
"3s" and "4s".
Note that the preview time is reset to "2s" when you turn off the unit.
<Note>:
You can also change the preview time during preview playback. In this case, the new
setting is effective from the next preview playback.
Preview time
PLAY MODE
PLAY
RECORD