Fostex MR16 Musical Instrument User Manual


 
109
MR16 Owner’s Manual (Data export to a personal computer)
3) Highlight "USB " by rotating the [MENU/ENTER]
knob, then press the [MENU/ENTER] knob.
The display shows the USB menu screen.
1) Turn on the power of the personal computer and
the MR16.
2) Press the [MENU/ENTER] knob to enter the menu
mode.
The display now shows the first page of the
menu selection screen, where "
Back" is
highlighted initially.
5) Connect the MR16 to a personal computer using
a USB cable.
6) Open "My computer" on the computer screen.
You see the "Removable disk" drive added on
the computer. The first time you connect the
MR16, the device driver is installed
automatically.
7) Open the added Removable disk drive, and
select the stereo WAV file in the desired song
folder, then copy to the computer.
When you open the added Removable disk
drive, the contents of the MR16 hard disk are
shown, in which you can see all the song
folders.
Open the "2 MIX" folder in the desired song
folder, and select the stereo WAV file, then copy
it to the computer.
<Note>:
By default, the disk protect func-
tion is enabled. In this condition, when the
MR16 enters the USB mode, “
<DISK PRO-
TECTED>
” is shown in the USB screen, as
above.
<Note>:
After copying a WAV file in the folder
to a computer, the original file remains. How-
ever, if you execute "
move to another folder
",
the original file on the disk is lost.
<Note>:
To disconnect the MR16 from the
personal computer after completing the data
export, make sure that the [
RECORD
] key
indicator is not lit, and follow the procedure
for hardware disconnection of Windows.
8) When the data export completes, disconnect the
MR16 from the personal computer.
4) Rotate the [MENU/ENTER] knob to move the
cursor to “USB Device Mode
”, and press the
[MENU/ENTER] knob.
The MR16 enters the USB mode and the
display shows the screen as below.
9) Press the [STOP] key to exit the menu mode.
<Note>:
While the MR16 is in the USB mode,
all keys except the [
STOP
] key are ineffec-
tive. Pressing the [
STOP
] key exits the USB
mode.