Filter
Top Products
144
MR16 Owner’s Manual (Other functions)
The MR16 can supply phantom power (+48 V) to the XLR balanced connectors of [INPUT A]
through [INPUT D].
So you can connect condenser microphones which require phantom power.
You can turn on or off phantom power to the XLR connectors via the menu mode.
<Note>:
The phantom power can be supplied to the XLR balanced connectors of [
INPUT A
]
through [
INPUT D
]. Therefore, to connect a sound source which does not require the phan-
tom power, use any of the unbalanced phone input jacks on [
INPUT A
] through [
INPUT D
].
If any plug is inserted to the unbalanced phone input jack, the phantom power is not
supplied to the balanced XLR connector on the same channel.
The phantom power setting returns to "
Off
" (default) when you turn off the MR16 power.
<Notes on using phantom power>
• Confirm that the connected microphone needs +48 V phantom power.
• Turn on the phantom power after making microphone connection.
• Mute the outputs of the MR16 when turning on or off the phantom power or plugging/
unplugging the microphone.
<Tip>
You can directly access to the input menu screen by a long press of the desired [TO
STEREO BUSS ON/OFF] key.
Phantom power on/off
Flashing
PEAK
GUITAR
MIN
DISTORTION
MAX
LINE MIC
TRIM
INSERT/GUITAR
UNBAL
BALBALBALBAL
INPUT A INPUT B INPUT C INPUT D
VOLUME
MIN
MAX
PEAK
LINE
TRIM
MIC
UNBAL
POWER
UNBAL
MIC
TRIM
LINE
PEAK
UNBAL
MIC
TRIM
LINE
PEAK
R
L
100
SIMULATION
SIMULATION
AMP
MIC
010
LR
010
LR
RL
100
010
LR
RL
100
RL
100
010
LR
UNDO/REDO
STORE
BOUNCE
MASTERING
BRIGHT
15/16 > STEREO WAV FILE
NATURAL
POWERFUL
B / OUTA / INPLAY MODEAUTO PUNCH
LOCATE
EFFECT
DELAYPLATEHALLROOM
BOUNCE MODE
CONTRAST
TIMEBASE SELECT
RHYTHM GUIDE DIRECT LOCATE
EFFECT SEND
PAN
INPUT EQ
TO STEREO BUSS LEVEL
MENU / ENTER
MIN MAX
MIN
MAX
REVERB / DELAY TIME
L
STEREO OUT
R
1
AUX OUT
2
1
PHONES
2
DYNAMIC BRIT STACK
INPUT A INPUT B INPUT C INPUT D
TO STEREO BUSS LEVEL
MIN
MAX
INPUT A INPUT B INPUT C INPUT D
[TO STEREO BUSS] key
For example, a long press of the [TO STEREO BUSS ON/OFF] key of [INPUT A] directly
accesses to the screen shown below.