Filter
Top Products
67
MR16 Owner’s Manual (Using effects)
<Hint>: You can also make input EQ setting by the following procedure.
(1) While the recorder is stopped, press the [MENU/ENTER] knob to enter the MENU mode.
(2) Rotate the [MENU/ENTER] knob to select "Input" on the second page and press the [MENU/ENTER]
knob.
(3) Use the [MENU/ENTER] knob to select the EQ setting item for the desired input channel and press the
[MENU/ENTER] knob.
(4) Use the [MENU/ENTER] knob to select the desired input EQ preset and press the [MENU/ENTER] knob.
(5) Press the [STOP] key to exit the MENU mode.
L01
L02
L03
L04
L05
L06
L07
L08
L09
L10
L11
L12
L13
L14
L15
L16
L17
Bright
Loudness
Warm
TightDrs
LoudDrums
HeavyKick
TightKick
NormSnare
FatSnare
WarmBass
TightBass
AcGuitar
DistGtr
AcPiano
WarmVocal
BrightVoc
B.G.Vocal
Enhances the brightness of a sound.
Enhances the loudness to a sound.
Adds a warm feel to a sound.
Used for the top microphone for a drum
kit. Also used for drum kit channels for
stereo mixing. You can get a tight sound
by cutting the mid frequency range.
Used for the top microphone for a drum
kit. Also used for drum kit channels for
stereo mixing. You can get a natural
drum sound by enhancing the low and
high frequency ranges moderately.
Adds thickness.
Adds fatness to the low frequency range
and emphasizes attack.
Enhances a snappy feel to a snare.
Enhances fatness to a snare, as well as
sharpness of high frequency range.
Add warmness to a bass sound.
Tightens a bass sound.
Enhances presence to an acoustic gui-
tar sound.
Adds fatness and presence to a distorted
guitar sound.
Good for an acoustic piano in ensemble.
Adds a warm feel to a vocal.
Adds brightness to a vocal.
Good for backing vocals.
L19
L20
L21
L22
L23
L24
L25
L26
L27
L28
L29
L30
L31
L32
L33
Radio1
Radio2
Radio3
HPF-50
HPF-100
HPF-160
HPF-250
LPF-12K
LPF-6.3K
HumRmv50
HumRmv60
NoiseRmv1
NoiseRmv2
NoiseRmv3
PhaseInv
Radio sound 1
Radio sound 2
Radio sound 3
Applies a 50 Hz high-pass filter to cut
the unnecessary low frequency range.
Applies a 100 Hz high-pass filter to cut
the unnecessary low frequency range.
Applies a 160 Hz high-pass filter to cut
the unnecessary low frequency range.
Applies a 250 Hz high-pass filter. Effec-
tive for cutting the wind noise.
Applies a 12 kHz low-pass filter to cut
the unnecessary high frequency range.
Applies a 6.3 kHz low-pass filter to cut
the unnecessary high frequency range.
Removes 50 Hz hum noise.
Removes 60 Hz hum noise.
Removes white noise. Effective for a
brighter sound.
Removes white noise. This is stronger
than L30.
Effective for a too bright sound.
Removes white noise. This is stronger
than L31.
Effective for a too bright sound.
Inverts phase. Note that when more than
one microphone is used for an instru-
ment, inverting phase may boost the low
frequency range.
EQ library
L18
Narration
Good for narration.
<Note>:
The contents of EQ library may change with the software upgrade in the future.