Filter
Top Products
155
MR16 Owner’s Manual (Troubleshooting)
<Trouble 8>: I cannot execute auto punch in/out.
• Is the auto punch in/out mode effective?
If it is not, press the [AUTO PUNCH] key to make the auto punch in/out function
active.
• Are the punch-in and punch-out points set correctly?
To check each point, press the [LOCATE A/IN] or [LOCATE B/OUT] key.
The recorder locates to the punch-in or punch-out point, while the screen shows
the appropriate time data.
If the punch-out point is earlier than the punch-in point, set these points
appropriately so that the punch-in point is earlier than the punch-out point.
<Trouble 9>: I cannot record audio data of a song onto an external digital recorder.
• Is the connection between the [DIGITAL OUT] connector on the MR16 and
the optical input connector of the digital recorder made correctly?
Check the connection, as well as the optical cable.
• Is the digital recorder set correctly for recording the signal fed to the
digital input?
See the manual of the digital recorder for details about the setting.
<Trouble 7>: During overdubbing, I cannot monitor the playback signal of the recorded
track.
• Is the track fader for the playback track raised?
During overdubbing, raise the faders for both the playback and recording tracks
appropriately. Otherwise, you cannot make overdubbing while listening to the
recorded track(s).
<Trouble 6>: The meter shows good level for recording, but no signal can be monitored
via headphones though the [PHONES VOL] control is raised.
• Are the track fader for the recording track and the [MASTER] fader raised?
Both of these faders, as well as the [PHONES VOL] control, have to be raised in
order to monitor the recording signal via headphones.
We recommend to raise both the track fader for the recording track and the
[MASTER] fader to the “ ” position.
• Is the recording track in the input monitor mode?
Make sure that the [RECORD] key flashes and " " is shown on the display.
If not, press the [RECORD] key to set the armed track to the input monitor mode.