Filter
Top Products
98
MR16 Owner’s Manual (Rhythm guide function)
• Deleting an unnecessary tempo event
You can delete an unnecessary tempo event.
2) Rotate the [MENU/ENTER] knob to select
"[DELETE]" at the bottom, and press the
[MENU/ENTER] knob.
The event is immediately deleted and the
display returns to the tempo map screen.
• Editing a tempo event
You can edit a tempo event.
2) To change the bar number, rotate the
[MENU/ENTER] knob to select "Bar = 12Bar", and
press the [MENU/ENTER] knob.
To change the beat number, rotate the
[MENU/ENTER] knob to select "Beat = 1
", and
press the [MENU/ENTER] knob.
To change the tempo, rotate the [MENU/ENTER]
knob to select "Tempo = 120bpm", and press the
[MENU/ENTER] knob.
As with the procedure described on the previous
page, you can now set the bar number, beat
number or tempo.
3) Rotate the [MENU/ENTER] knob to edit the value,
and press the [MENU/ENTER] knob.
In this procedure example, let's enter "10" for
the bar number.
4) Rotate the [MENU/ENTER] knob to select "[ENTER]"
at the bottom, and press the [MENU/ENTER] knob.
The editing is confirmed and the display returns
to the tempo map screen.
<Before editing>
<After editing>
<After deleting>
To exit the menu mode, press the [STOP] key,
or select "
Back" and press the [MENU/ENTER]
knob repeatedly.
1) On the tempo map screen, rotate the
[MENU/ENTER] knob to select the event you want
to edit, and press the [MENU/ENTER] knob.
As with the description on the previous page,
the display now shows the screen for setting
the event.
For example, let's select "12Bar 1
-> 120bpm".
1) On the tempo map screen, rotate the
[MENU/ENTER] knob to select the event you want
to delete, and press the [MENU/ENTER] knob.
As with the description on the previous page,
the display now shows the screen for setting
the event.
For example, let's select "12Bar 1
->120bpm".
To exit the menu mode, press the [STOP] key,
or select "
Back" and press the [MENU/ENTER]
knob repeatedly.