Filter
Top Products
50
MR16 Owner’s Manual (Advanced playback and locate functions)
In the Auto play mode, when locating to the ABS ZERO, REC END, LOCATE A or LOCATE B point,
the recorder automatically starts playback from the point. The following shows the auto play
function after locating to the LOCATE A point (see page 52 for the locate function).
The auto return mode is active when the LOCATE A and LOCATE B points are set.
In the auto return mode, when reaching at the LOCATE B point during playback, the recorder
automatically locates to the LOCATE A point and stops.
As with the auto return mode, the loop mode is active when the LOCATE A and LOCATE B points
are set. In the loop mode, when reaching at the LOCATE B point during playback, the recorder
automatically locates to the LOCATE A point and starts playback. The recorder repeats this
behavior until you stop the recorder.
You may find it very convenience to use the loop function together with the auto punch in/out
function (see the next page).
Auto play mode
Auto return mode
Loop mode
When locating to the LOCATE A point, the recorder
automatically starts playback.
When reaching at the LOCATE B point during
playback, the recorder automatically locates to
the LOCATE A point.
LOCATE A point
Playback
LOCATE B point
LOCATE A point
playback
LOCATE B point
When reaching at the LOCATE B point during playback,
the recorder automatically locates to the LOCATE A
point and stops.
When locating to the LOCATE A point,
the recorder automatically starts
playback immediately.
LOCATE A point
Playback
The point where you
execute the locate function
The point where you
execute the locate function
Locate
Locate