Filter
Top Products
32
Editing the Tones (TONE)
AC
STEEL
Group Parameter Value Description
BODY
BODY TYPE #
Species the acoustic guitar type.
MA28 The sound of a Martin D-28. Older model known for its exquisitely balanced sound.
TRP-0
The sound of a Martin 000-28. This model features a full low-end resonance and crisp,
distinct contour.
GB45
The sound of a Gibson J-45. This vintage model features a unique, seasoned tone with
good response.
GB SML
The sound of a Gibson B-25. Featuring a compact body, this vintage model is often
used in blues.
GLD40
The sound of a Guild D-40. This model features warm resonance from the body along
with a delicate string resonance.
BODY 0–100
Adjusts the body resonation. Raising the value produces more of a sense of the guitar
body in the sound. Lower the value in conditions where feedback is prone to occur.
TONE # -50–+50
Adjusts the tone of the body. The standard value is 0; raising the value boosts the high
range.
NS Refer to the NS section of the table for the “CLA-ST, MOD-ST, ST” model in the “E.GTR” section (p.31).
NYLON
Group Parameter Value Description
BODY
BODY # 0–100
Adjusts the body resonation. Raising the value produces more of a sense of the guitar
body in the sound. Lower the value in conditions where feedback is prone to occur.
ATTACK 0–100
Species the strength of the attack when you pluck the string strongly. As this setting
is increased, the attack will be sharper, and the sound will be crisper.
TONE # -50–+50
Adjusts the tone of the body. The standard value is 0; raising the value boosts the high
range.
SITAR
Group Parameter Value Description
BODY
PU SEL #
FRONT Simulates the sound produced when the front pickup is used.
R+F Simulates the sound produced when both rear and front pickups are used.
REAR Simulates the sound produced when the rear pickup is used.
PIEZO Simulates the sound produced when the piezo pickup is used.
SENS 0–100 Adjusts the input sensitivity.
BODY 0–100
Adjusts the body resonation. Raising the value produces more of a sense of the guitar
body in the sound. Lower the value in conditions where feedback is prone to occur.
COLOR 0–100 Adjusts the overall tone quality of the sitar.
DECAY 0–100 Adjusts the time it takes following the attack for the tone to change.
BUZZ 0–100
Adjusts the amount of characteristic buzz produced by the buzz bridge when the
strings make contact with it.
ATTACK LEVEL 0–100 Adjusts the volume level of the attack.
TONE # -50–+50
Adjusts the tone of the body. The standard value is 0; raising the value boosts the high
range.