Filter
Top Products
69
Settings for the Entire GR-55 (SYSTEM)
Settings that aect the overall operation of the entire GR-55, such as
tuning and pedal assignments, are called “system settings.” This section
explains the procedure for setting system parameters, and how each
system parameter operates.
Basic procedure
1. Press the [EDIT] button to access the EDIT screen.
2. Use the PAGE [ ] [ ] buttons to select the SYSTEM tab.
3. Use the cursor [ ] [ ] buttons to select the icon for the
settings you want to edit.
Icon Description Page
GK SETTING GK pickup settings. p.69
OUTPUT SELECT
Specify the device (amp)
connected to the OUTPUT
jacks.
p.70
PEDAL/GK CTL Pedal-related settings. p.70
MIDI/USB MIDI and USB settings. p.70
OTHER
GUITAR OUT GUITAR OUT jack settings. p.70
TUNER Tune your guitar. p.71
AUDIO PLAYER
Play back audio les (WAV,
AIFF).
p.65
LCD Adjust the display contrast. p.71
POWER Auto Power O settings. p.71
BACKUP
/INIT
BACKUP/
RESTORE
Back up the GR-55’s
settings to USB memory,
or restore these settings to
the GR-55.
p.72
PEDAL CALIB
Calibrate the sensitivity of
the pedal.
p.73
FACTORY RESET
Return the GR-55’s
settings to the factory-set
condition.
p.73
GUITAR<->BASS
Specify whether you’re
using the GR-55 with a
guitar or a bass.
p.71
4. Press the [ENTER] button.
The editing screen for the selected parameters will appear.
5. Edit the parameter settings.
Use the PAGE [ ] [ ] buttons to move between tabs.
Use the cursor [ ] [ ] buttons to select the parameter that you
want to edit, and use the dial to edit the value of the parameter.
For details on each parameter, refer to “Parameter List (SYSTEM)” (p.74).
6. When you’ve nished editing, press the [EXIT] button.
Setting the GK Pickups (GK SETTING)
To ensure that the GR-55 will perform optimally, it’s important to make
settings for the divided pickup (GK settings). These settings must be
made when you newly attach a divided pickup to a guitar, or when
you’ve adjusted the height of the divided pickup.
The GR-55 lets you create and store ten sets of GK settings (GK set). If
you’re using the GR-55 with more than one guitar, you should prepare
and store GK sets for each guitar, so that you can quickly switch to the
appropriate settings for a particular guitar when you switch guitars.
These settings are remembered even while the power is turned o.
Once you’ve made them, there’s no need to make them again each
time you perform; simply choose the appropriate GK set.
1. Press the [EDIT] button to access the EDIT screen.
2. Use the PAGE [
] [ ] buttons to access the SYSTEM tab.
3. Use the cursor [
] [ ] buttons to select the GK SETTING
icon, and press the [ENTER] button.
4. Use the cursor buttons to move the cursor to the position
shown in the illustration.
5. Use the dial to select a GK SET (1–10).
6. Edit the GK setting.
The edited values are saved directly in the GK set you selected.
For details on each parameter, refer to “GK SETTING” (p.74).