Filter
Top Products
56
Patch Settings (MASTER)
Tab Parameter Value Description
CTL,
EXP SW,
GK S1,
GK S2
FUNCTION
AUDIO PLAYER PLAY/
STOP
Starts/stops the audio player.
AUDIO PLAYER SONG
INC
Selects the audio le in USB memory played by the audio player.
AUDIO PLAYER SONG
DEC
AUDIO PLAYER SW Performs the same operation as when the panel’s [AUDIO PLAYER] button is pressed.
V-LINK SW Performs the same operation as when the panel’s [V-LINK] button is pressed.
LED MOMENT The pedal indicator lights up while you press the pedal, and it goes out when you release the pedal.
LED TOGGLE The pedal indicator lights up and goes out when alternate each time you press the pedal.
EXP,
EXP ON,
GK VOL
FUNCTION
Here you can specify the functions that will be assigned to the expression pedal or to the GK volume knob.
Two dierent functions can be assigned separately to the expression pedal; one function for when the expression pedal switch is on,
and another function for when it is o.
OFF No function will be assigned to the above pedal or knob.
PATCH VOLUME Adjusts the volume of the patch.
TONE VOLUME
Adjusts the volume of the tones and the normal pickup.
TONE VOLUME
parameter
Value Description
PCM TONE 1 OFF, ON
If you don’t want the control to adjust the volume of the
respective tone or pickup, choose “OFF.”
PCM TONE 2 OFF, ON
MODELING TONE OFF, ON
NORMAL PU OFF, ON
PITCH BEND
Changes the pitch of PCM tone 1, PCM tone 2, and the modeling tone.
PITCH BEND parameter Value Description
DEPTH -12–+12
Species the maximum pitch change that will occur when
you fully depress the pedal.
PCM TONE 1 OFF, ON
Choose “OFF” if you don’t want to change the pitch of PCM
TONE 1.
PCM TONE 2 OFF, ON
Choose “OFF” if you don’t want to change the pitch of PCM
tone 2.
MODELING TONE OFF, ON
Choose “OFF” if you don’t want to change the pitch of the
modeling tone.
There will be no eect if “12STR SW” (p.29) is “ON.”
MODULATION
Controls the depth of modulation for PCM tone 1 and PCM tone 2.
The eect will dier depending on the PCM tone that’s selected.
MODULATION
parameter
Value Description
MIN 0–100
Species the depth of modulation when the pedal is fully
released.
MAX 0–100
Species the depth of modulation when the pedal is fully
depressed.
PCM TONE 1 OFF, ON
Choose “OFF” if you don’t want to apply modulation to PCM
tone 1.
PCM TONE 2 OFF, ON
Choose “OFF” if you don’t want to apply modulation to PCM
tone 2.
CROSS FADER
Controls the volume balance of the tones.
CROSS FADER
parameter
Value Description
PCM TONE 1 POLARITY
PCM TONE 2 POLARITY
MODELING TONE
POLARITY
NORMAL PU POLARITY
OFF The volume of the tone will not change.
TOE
The volume of the tone will increase as you depress the
pedal.
HEEL
The volume of the tone will increase as you lift up on the
pedal.
DELAY LEVEL
REVERB LEVEL
CHORUS LEVEL
Controls the DELAY/REVERB/CHORUS eect level.
Parameter Value Description
MIN
0–120 (DELAY)
0–100 (REVERB,
CHORUS)
Species the eect level when the pedal is fully released.
MAX Species the eect level when the pedal is fully depressed.