Filter
Top Products
34
Editing the Tones (TONE)
RICK
Group Parameter Value Description
PU
REAR VOL 0–100 Sets the volume of the rear pickup.
FRONT VOL 0–100 Sets the volume of the front pickup.
REAR TONE 0–100 Adjusts the tone of the rear pickup.
FRONT TONE 0–100 Adjusts the tone of the front pickup.
VOLUME 0–100 Sets the overall bass volume level. With a setting of 0, there will be no sound.
PU SEL #
REAR Simulates the sound produced when the rear pickup is used.
R+F Simulates the sound produced when both rear and front pickups are used.
FRONT Simulates the sound produced when the front pickup is used.
NS Refer to the NS section of the table for the “CLA-ST, MOD-ST, ST” model in the “E.GTR” section (p.31).
ACTIVE
Group Parameter Value Description
PU
REAR VOL 0–100 Sets the volume of the rear pickup.
FRONT VOL 0–100 Sets the volume of the front pickup.
TREBLE # 0–100 Adjusts the tone for the high frequency range.
BASS # 0–100 Adjusts the tone for the low frequency range.
VOLUME 0–100 Sets the overall bass volume level. With a setting of 0, there will be no sound.
NS Refer to the NS section of the table for the “CLA-ST, MOD-ST, ST” model in the “E.GTR” section (p.31).
VIOLIN
Group Parameter Value Description
PU
REAR VOL 0–100 Sets the volume of the rear pickup.
FRONT VOL 0–100 Sets the volume of the front pickup.
VOLUME 0–100 Sets the overall bass volume level. With a setting of 0, there will be no sound.
TREBLE ON # OFF, ON Switches the rear pickup on/o.
BASS ON # OFF, ON Switches the front pickup on/o.
RHYTHM/SOLO #
RHYTHM Selects a lower volume suitable for backing.
SOLO Selects a higher volume suitable for soloing.
NS Refer to the NS section of the table for the “CLA-ST, MOD-ST, ST” model in the “E.GTR” section (p.31).