Filter
Top Products
55
Patch Settings (MASTER)
Parameter List (MASTER)
PEDAL/GK CTL
Tab Parameter Value Description
CTL,
EXP SW,
GK S1,
GK S2
STATUS
(CTL, EXP SW
only)
OFF, ON Switches the pedal on/o (reects the indicator’s illumination status).
FUNCTION
Here you can specify the function that will be assigned to the [CTL] pedal, the expression pedal switch, or the GK [S1]/[S2] buttons.
OFF No function will be assigned to the above pedal or switch.
HOLD
(CTL only)
HOLD parameter Value Description
HOLD TYPE
1
Notes that were sounding when you pressed the pedal
will be held, and successive notes that are played while
you continue holding down the pedal will also be held.
This diers from “HOLD TYPE 4” in that if a note is already
sounding on the same string, the previous note will be
silenced, and the note newly played on that string will take
its place. This allows you to play without a break even if the
note is on a distant fret.
2
Notes that were sounding when you pressed the pedal will
be held as long as you continue holding down the pedal.
Notes played after you started holding down the pedal will
not sound.
3
Notes that were sounding when you pressed the pedal will
be held as long as you continue holding down the pedal.
Notes played after you started holding down the pedal will
sound, but will not be held.
4
Notes that were sounding when you pressed the pedal will
be held, and successive notes that are played while you
continue holding down the pedal will also be held.
SWITCH MODE
LATCH Hold will turn on/o each time you press the pedal.
MOMENT Hold will be on only while you hold down the pedal.
PCM TONE 1 OFF, ON
Choose the “OFF” setting if you don’t want the tone to be
held.
PCM TONE 2 OFF, ON
TAP TEMPO Sets the tempo to the timing at which you press the pedal.
TONE SW
Controls the on/o switch for each tone and the normal pickup.
TONE SW parameter Value Description
SW OFF
PCM TONE 1
OFF/ON
These settings are for when the STATUS of each controller
([CTL] pedal, expression pedal switch) is “OFF.”
GK S1/S2 are the settings for the default state (i.e., before
you’ve pressed a switch).
PCM TONE 2
OFF/ON
MODELING
TONE OFF/ON
NORMAL PU
OFF/ON
SW ON
PCM TONE 1
OFF/ON
These settings are for when the STATUS of each controller
([CTL] pedal, expression pedal switch) is “ON.”
GK S1/S2 are the settings for when the switch has been
pressed once.
PCM TONE 2
OFF/ON
MODELING
TONE OFF/ON
NORMAL PU
OFF/ON
AMP SW Switches AMP on/o.
MOD SW Switches MOD on/o.
MFX SW Switches MFX on/o.
DELAY SW Switches DELAY on/o.
REVERB SW Switches REVERB on/o.
CHORUS SW Switches CHORUS on/o.