Filter
Top Products
58
Patch Settings (MASTER)
Tab Parameter Value Description
ASSIGN
1–8
INT TRIG
Species how the motion of the internal pedal will be triggered. *1
PATCH CHANGE Triggered when you switch patches.
CTL PDL Triggered when you operate the [CTL] pedal.
EXP LOW Triggered when you move the expression pedal to minimum.
EXP MID Triggered when you depress the expression pedal through the center value.
EXP HIGH Triggered when you move the expression pedal to maximum.
EXP ON LOW
Triggered when you move the expression pedal to minimum while the expression pedal switch is
on.
EXP ON MID
Triggered when you depress the expression pedal through the center value while the expression
pedal switch is on.
EXP ON HIGH
Triggered when you move the expression pedal to maximum while the expression pedal switch is
on.
EXP SW Triggered when you operate the expression pedal switch.
GK S1 Triggered when you operate the [S1] button of the GK pickup.
GK S2 Triggered when you operate the [S2] button of the GK pickup.
INT TIME 0–100
Species the time over which the internal pedal will move from the released (heel) position to the
depressed (toe) position. *1
INT CURVE
LINEAR,
SLOW RISE,
FAST RISE
Selects one of the following curves to specify the change produced by the internal pedal. *1
LINEAR SLOW RISE FAST RISE
WAVE RATE 0–100, BPM
Species the time for one cycle of the wave pedal. *2
If you choose BPM, the value of this parameter will be set according to the “PATCH TEMPO” (p.58)
setting of each patch. This is an easy way to make the eect sound synchronize to the tempo of each
song.
* If the time determined by the tempo exceeds the allowable length, it will be set to
synchronize to 1/2 or 1/4 of that time.
WAVE FORM SAW, TRI, SIN
Select one of the following to specify the change produced by the wave pedal. *2
SAW
TRIANGLE
SINE
*1 INT TRIG, INT TIME, and INT CURVE are used if SOURCE is set to “INT PDL.”
*2 WAVE RATE and WAVE FORM are used if SOURCE is set to “WAVE PDL.”
PATCH TEMPO
Group Parameter Value Description
PATCH TEMPO TEMPO 20–250
Species the tempo for tempo-synchronized eects.
If SYSTEM–MIDI/USB–GENERAL–MIDI SYNC (p.79) is “ON,” the tempo is determined by
MIDI clock from an external device.
GK SET
Group Parameter Value Description
GK SET SELECT SYSTEM, 1–10
Normally, you can leave this set to “SYSTEM.” If you swap guitars for dierent patches,
choose the GK SET you specied for the guitar you use with this patch.