Filter
Top Products
45
Eect Settings (EFFECT)
14: EQ
LOW GAIN LO-MID GAIN
LO-MID FREQ HI-MID FREQ
Frequency
HI-MID GAIN HIGH GAIN
Parameter Value Description
LOW CUT
FLAT,
55–800 Hz
Species the frequency at which the low
cut lter begins to take eect. When FLAT is
selected, the low cut lter will have no eect.
LOW GAIN # -20–+20 dB Adjusts the low frequency range tone.
LO-MID FREQ
20.0 Hz–
10.0 kHz
Species the center of the frequency range that
will be adjusted by the LO-MID GAIN.
LO-MID Q 0.5–16
Adjusts the width of the area aected by the EQ
centered at the LO-MID FREQ. Higher values will
narrow the area.
LO-MID GAIN # -20–+20 dB Adjusts the low-middle frequency range tone.
HI-MID FREQ
20.0 Hz–
10.0 kHz
Species the center of the frequency range that
will be adjusted by the HI-MID GAIN.
HI-MID Q 0.5–16
Adjusts the width of the area aected by the EQ
centered at the HI-MID FREQ. Higher values will
narrow the area.
HI-MID GAIN # -20–+20 dB Adjusts the high-middle frequency range tone.
HIGH GAIN # -20–+20 dB Adjusts the high frequency range tone.
HIGH CUT
700 Hz–
11.0 kHz,
FLAT
Species the frequency at which the high
cut lter begins to take eect. When FLAT is
selected, the high cut lter will have no eect.
LEVEL -20–+20 dB Adjusts the overall volume of the equalizer.
MFX
Group Parameter Value Description
Name of
MFX type
indicated
SWITCH OFF, ON Turns MFX OFF/ON.
PAN L50–R50
Adjusts the pan position.
The PAN parameter is valid even if
SWITCH is “OFF.”
EFFECT TYPE
Refer to “MFX
Type”
Species the MFX type.
MFX Type
01: EQ
This EQ lets you modify the tone quality by adjusting the low range, two mid-ranges,
and the high range.
L in
R in
L out
R out
4-Band EQ
4-Band EQ
Parameter Value Description
LOW FREQ 200, 400 Hz
Species the frequency of the
low range.
LOW GAIN # -15–+15 dB
Adjusts the gain of the low
range.
MID1 FREQ 200–8000 Hz
Adjusts the frequency of middle
range 1.
MID1 GAIN # -15–+15 dB
Adjusts the gain of middle
range 1.
MID1 Q 0.5, 1.0, 2.0, 4.0, 8.0
Species the width of middle
range 1.
Set a higher value for Q to
narrow the range to be aected.
MID2 FREQ 200–8000 Hz
Adjusts the frequency of middle
range 2.
MID2 GAIN # -15–+15 dB
Adjusts the gain of middle
range 2.
MID2 Q 0.5, 1.0, 2.0, 4.0, 8.0
Species the width of middle
range 2.
Set a higher value for Q to
narrow the range to be aected.
HIGH FREQ 2000, 4000, 8000 Hz
Species the frequency of the
high range.
HIGH GAIN # -15–+15 dB
Adjusts the gain of the high
range.
LEVEL 0–100 Adjusts the output volume.