Filter
Top Products
52
Eect Settings (EFFECT)
19: LOFI COMPRESS
This is an eect that intentionally degrades the sound quality for creative purposes.
L in
R in
L out
R out
Compressor
Lo-Fi
Lo-Fi
Compressor
2-Band
EQ
2-Band
EQ
Parameter Value Description
PRE FILTER TYPE #
Selects the type of lter applied to the sound before it
passes through the Lo-Fi eect.
1 The compressor will be o.
2–6 The compressor will be on.
LOFI TYPE # 1–9
Degrades the sound quality. The
sound quality grows poorer as
this value is increased.
POST FILTER TYPE
Selects the type of lter applied to the sound after it
passes through the Lo-Fi eect.
OFF No lter is used.
LPF
Cuts the frequency range above
the Cuto.
HPF
Cuts the frequency range below
the Cuto.
POST FILTER CUTOFF 200–8000 Hz
Adjusts the basic frequency of
the POST FILTER.
LOW GAIN -15–+15 dB
Adjusts the gain of the low
range.
HIGH GAIN -15–+15 dB
Adjusts the gain of the high
range.
BALANCE # D100:0W–D0:100W
Adjusts the volume balance
between the direct sound (D)
and the chorus sound (W).
LEVEL 0–100 Adjusts the output volume.
20: PITCH SHIFTER
This is a stereo pitch shifter.
L in
R in
Pitch Shifter
Pitch Shifter
L out
R out
2-Band EQ
2-Band EQ
Parameter Value Description
COARSE # -24–+12 semi
Adjusts the pitch of the pitch
shifted sound in semitone steps.
FINE # -100–+100 cent
Adjusts the pitch of the pitch
shifted sound in 2-cent steps.
DELAY TIME
1–1300 msec,
BPM
–
Adjusts the delay time from
the direct sound until the pitch
shifted sound is heard.
FEEDBACK -98–+98%
Adjusts the proportion of the
pitch shifted sound that is fed
back into the eect. Negative (-)
settings will invert the phase.
LOW GAIN -15–+15 dB
Adjusts the gain of the low
range.
HIGH GAIN -15–+15 dB
Adjusts the gain of the high
range.
BALANCE # D100:0W–D0:100W
Adjusts the volume balance
between the direct sound (D)
and the chorus sound (W).
LEVEL 0–100 Adjusts the output volume.
DELAY
Group Parameter Value Description
TYPE
SWITCH OFF, ON Turns the DELAY OFF/ON.
TYPE
Use this to choose the type of delay.
01:SINGLE A simple monaural delay.
02: PAN
Provides a tap delay eect that divides
the delay time between the left and
right channels.
03: REVERSE
Produces the eect of playback in
reverse.
04: ANALOG Produces a mild analog delay sound.
05: TAPE
This setting provides the characteristic
wavering sound of a tape echo.
06:
MODULATE
A delay with a pleasant amount of
modulation added.
07: HICUT
Produces a warm-sounding delay with
the high frequencies attenuated.
DELAY
TIME #
1–3400 msec,
BPM
–
Adjusts the delay time.
FEEDBACK
#
0–100
Adjusts the number of repetitions for
the delay.
EFFECT
LEVEL
0–120 Adjusts the volume level of the eect.
SEND
MFX SEND 0–100
Adjusts the volume of the signal sent
from the MFX output to DELAY.
MOD
SEND
0–100
Adjusts the volume of the signal sent
from the AMP-MOD output to DELAY.
BYPASS
SEND
0–100
Adjusts the volume of the signal sent
from the bypass channel (unprocessed
by the eect) to DELAY.
REVERB
Group Parameter Value Description
TYPE
SWITCH OFF, ON Turns the REVERB OFF/ON.
TYPE
Use this to choose the type of reverb.
01:
AMBIENCE
Simulates an ambience microphone (o-
mic, placed at a distance from the sound
source) used in recording and other
applications. Rather than emphasizing
the reverberation, this reverb is used to
produce a sense of openness and depth.
02: ROOM
Simulates the reverberation of a small
room. Provides warm reverberations.
03: HALL 1
Simulates the reverberation of a concert
hall. Provides clear and spacious
reverberations.
04: HALL 2
Simulates the reverberation of a concert
hall. Provides mild reverberations.
05: PLATE
Simulates plate reverberation (a studio
eect unit that uses the vibration
of a large metal plate to produce
reverberation). Provides a metallic sound
with a distinct upper range.
REVERB
TIME #
0.1 s–10.0 s
Adjusts the length (time) of
reverberation.
HIGH
CUT #
700 Hz–
11.0 kHz,
FLAT
The high cut lter adjusts the amount
of high frequencies in the reverb sound.
When FLAT is selected, the high cut lter
will have no eect.
EFFECT
LEVEL
0–100 Adjusts the volume level of the eect.