Filter
Top Products
54
Patch Settings (MASTER)
Basic operation
1. Select a patch and press the [EDIT] button.
The EDIT screen will appear.
2. Use the PAGE [ ] [ ] buttons to select the MASTER tab.
3. Use the cursor [ ] [ ] buttons to select the icon for the
settings you want to edit.
Icon Description Page
PEDAL/GK CTL
Settings for the pedals and
GK controls.
p.55
ASSIGN Controller settings. p.57
OTHER
PATCH TEMPO Patch tempo setting. p.58
GK SET
GK pickup settings for each
patch.
p.58
GUITAR OUT GUITAR OUT jack settings. p.59
ALT-TUNING
Tuning adjustments for each
string.
p.59
V-LINK V-LINK settings. p.59
4. Press the [ENTER] button.
5. Edit the parameter settings.
Use the cursor [ ] [ ] buttons to select the parameter that you
want to edit, and use the dial to edit the value of the parameter.
6. If you want to keep the changes you made, save the patch
(p.60).
Pedal and GK Control Settings
(PEDAL/GK CTL)
For each patch, you can change the operation that occurs when you
operate the pedal or operate the GK controls (p.61).
For details on the parameters, refer to “PEDAL/GK CTL” (p.55).
NOTE!
This is available if the SYSTEM parameter “FUNCTION” (p.76) is
set to “PATCH SETTING.” (If unavailable, the display will indicate
“**[SYSTEM]**”.)
Controller Settings (ASSIGN)
For each parameter, you can specify which controller will control the
parameter (p.62).
For details on the parameters, refer to “ASSIGN” (p.57).
Patch Tempo Setting (PATCH TEMPO)
You can specify the tempo used for tempo-synchronized eects.
For details on the parameter, refer to “PATCH TEMPO” (p.58).
GK Pickup Settings for Each Patch
(GK SET)
If you’re using the GR-55 for live performance, you might change
guitars depending on the song you’re performing.
If so, you can create a GK SET (“GK SETTING,” p.69) for each guitar, and
then specify that the GK SET for the guitar used in a particular song
will be recalled when you select the patch used for that song.
For details on the parameters, refer to “GK SETTING” (p.74).
GUITAR OUT Jack Settings
(GUITAR OUT)
The GUITAR OUT jack can output the normal pickup sound and the
sound of the modeling tone.
For example, you can make settings so that the normal pickup sound
and the modeling tone sound will be played through a guitar amp,
while the other synthesizer sounds will be played through the PA
system connected to the OUTPUT jacks. For details, refer to System
settings “GUITAR OUT Jack Settings (GUITAR OUT)” (p.70).
For details on the parameters, refer to “GUITAR OUT” (p.59).
MEMO
If the SYSTEM setting GUITAR OUT (p.80) is set to anything other than
“PATCH,” this setting is ignored.
Changing the Tuning of Each String
(ALT-TUNING)
You can change the pitch of each string without changing the tuning
of your guitar.
For details on the parameters, refer to “ALT-TUNING” (p.59).
* The pitch of the normal pickup sound will not change.
V-LINK Settings (V-LINK)
You can make settings for V-LINK (p.68), a function that allows you to
switch images or control the brightness or hue of an image.
For details on the parameters, refer to “V-LINK” (p.59).