Filter
Top Products
4.2 KX-TDA Series PBX Programming for DPT Integration
102 Installation Manual
c) Program the PBX so that it will direct overflowed calls to the ICD group's mailbox.
1) Go to the "Groups-VM(DPT) Group-System Setting" screen.
2) Select "Enable" as the parameter for "Intercept to Mailbox".
3) Click "Apply" to save the changed data.
4. Make sure all installation and line connections have been done as described in Section 2
Installation.
5. Connect the jack assigned in Step 2 to the VPS.
6. Complete the PBX-VPS connection by following from step 1 of 4.8 Completing the PBX-VPS
Connection.