Filter
Top Products
5.4 KX-TE Series PBX Programming for Inband Integration
170 Installation Manual
5.4 KX-TE Series PBX Programming for Inband
Integration
The instructions in this section are for programming a KX-TE series PBX via the Operating and
Maintenance Tool. To program a KX-TE series PBX using the Manager Extension, follow the
instructions for KX-TA series PBX programming by referring to 5.7 KX-TA Series PBX Programming
for Inband Integration.
1. Go to the "1.System-2.Main" screen.
2. Under "Voice Mail", select "DTMF Integration", then select each extension jack that is connected
to the VPS. Click "Apply" to save the changed data.
3. Go to the "2.Extension-6.Extension Group" screen.
4. Put all extensions connected to the VPS into the same extension group.
Reserve this extension group for these extensions! Do not mix other extensions into this
group.
5. Set the hunting type for the VPS extension groups to "Circular". Click "Apply" to save the changed
data.