Panasonic KX-TVM50 Recording Equipment User Manual


 
4.9 KX-TA, KX-TD, and KX-TE Series PBX Feature Programming for APT/DPT Integration
Installation Manual 143
KX-TE and KX-TA: [93]
Screen output: LCS Cancel
4. Press the STORE button. The STORE indicator lights.
The display shows the initial programming mode.
5. To exit the Personal Programming mode, press the PROGRAM button or set the MEMORY
switch to "SET".
6. Repeat these steps for each telephone.
The Live Call Screening Cancel Button Assignment is optional; Live Call Screening can also be
cancelled by pressing the FLASH button.
4.9.9 Two-way Recording Button Assignment
For the Two-way Recording feature to work at an extension, the extension must have a TWR button
on it. This key must either be a DSS/BLF or CO key with a lamp. Follow the procedure below to assign
a TWR button on an extension. (This item should be programmed by each extension user through
Personal Programming.)
PC programming is also available for KX-TD500 users (see 4.9.12 Button Assignment via PC
Programming).
1. Enter PITS Programming:
a. While on-hook, press the PROGRAM button or set the MEMORY switch to "PROGRAM".
b. Enter [99]. (This step is not needed for KX-TE and KX-TA.) The display changes to PT-PGM
Mode.
2. Press the Flexible button (CO or DSS/BLF) that you want to assign as the TWR button.
3. Enter the programming number.
KX-TD500: [90]
KX-TD1232/KX-TD816 G, SL, NE, FR, E, AL: [83]
KX-TD1232/KX-TD816 CE, JT, SA, NL, SP, NZ, RU, PD: [83]
KX-TD1232/KX-TD816 C, BX, HK, X, X-BR, DBX, ML, BXDD: [90]
KX-TDN1232, KX-TD88 CN: [90]
KX-TD612: [83]
KX-TE and KX-TA: [90]
Screen output: 2Way-Rec:
4. Dial the Voice Mail extension number.
Screen output: 2Way-Rec: _ _ _
(_ _ _ = The extension number you entered).
5. Press Store.
6. To exit the Personal Programming mode, press the PROGRAM button or set the MEMORY
switch to "SET".
7. Repeat these steps for each telephone.
Conditions: This button must be a CO or DSS/BLF key to be
programmed as a TWR button. If this key is pressed
when all Voice Mail ports are busy, the user will hear
a reorder tone.