Filter
Top Products
4.3 KX-TDA Series Feature Programming for DPT Integration
Installation Manual 107
4.3.7 Live Call Screening Button Assignment
For the Live Call Screening feature to work at an extension, the extension must have an LCS button
lit at the time of the message reception. This button must either be a DSS/BLF or CO button with a
lamp. Follow the procedure below to assign an LCS button on an extension. (This is station level
programming and should be done at each individual telephone.) PC programming is also available
(see 4.3.12 Button Assignment via PC Programming).
1. Enter Personal Programming:
While on-hook, press the PROGRAM button.
(Display changes to PT-PGM Mode.)
2. Press the desired Flexible (CO or DSS/BLF) button you want to assign as the LCS button.
3. Enter [92].
Screen output: LCS
4. Press the STORE button.
5. Press the PROGRAM button or lift the handset to exit the Personal Programming mode.
6. Repeat these steps for each telephone.
Conditions: This button must be assigned and lit for LCS to
operate. To light this button, press the button and
enter the LCS password (see 4.3.2 Live Call
Screening Password Assignment).