Filter
Top Products
4.3 KX-TDA Series Feature Programming for DPT Integration
Installation Manual 111
Note
• The screen shot above is an example of the KX-TDA200.
2. Select "Extension Number / Name" for which you want to program.
3. Assign the desired Key Type to the Key Location you wish to program. When "Two-way Record",
"Two-way Transfer" or "Voice Mail Transfer" is selected, enter the VM Port floating extension
number in "Ext No. or Floating Ext No.". When "Two-way Transfer" is selected, you can enter the
extension number of a desired destination under "Extension Number of Mailbox". If no extension
number is assigned, you will have to enter an extension number each time you use the Two-way
Transfer feature.
4. Repeat these steps for each extension.
5. Click "Apply" to save the changed data.
4.3.13 Live Call Screening Activation
To activate Live Call Screening, follow the steps below. PC programming is also available (see 4.3.7
Live Call Screening Button Assignment and 4.3.12 Button Assignment via PC Programming).
1. Press the assigned LCS Button.
2. Enter the assigned LCS Password.
3. Confirm that the assigned LCS Button is red-on.
4. Repeat these steps for each telephone.
Conditions: To activate Live Call Screening, it is necessary to
light the LCS button after assigning the LCS
password and LCS button.