Filter
Top Products
4.3 KX-TDA Series Feature Programming for DPT Integration
110 Installation Manual
4.3.11 Voice Mail Transfer (VTR) Button Assignment
For the Voice Mail Transfer feature to work at an extension, the extension must have the VTR button.
This button must either be a DSS/BLF or CO button with a lamp. Follow the procedure below to assign
a VTR button on an extension. (This is station level programming and should be done at each
individual telephone.) PC programming is also available (see 4.3.12 Button Assignment via PC
Programming).
1. Enter Personal Programming:
While on-hook, press the PROGRAM button.
(Display changes to PT-PGM Mode.)
2. Press the desired Flexible (CO or DSS/BLF) button that you want to assign as the VTR button.
3. Press [94].
Screen output: VTR-
4. Enter a Voice Mail floating extension number.
Screen output: VTR- _ _ _
(_ _ _ = The Voice Mail floating extension number you entered).
5. Press the STORE button.
6. Press the PROGRAM button or lift the handset to exit the Personal Programming mode.
7. Repeat these steps for each telephone.
4.3.12 Button Assignment via PC Programming
The KX-TDA series users can assign buttons for Live Call Screening (LCS), Two-way Recording
(TWR), Two-way Transfer (TWT), and Voice Mail Transfer (VTR) via PC Programming. Follow the
procedure below to assign each button.
1. Go to "Extension-Wired Extension-Flexible Key" screen.
Conditions: This button must be a flexible (CO or DSS/BLF)
button to be programmed as a VTR button. When all
Voice Mail ports are busy and this key is pressed
followed by an extension number, the user will hear
either a dial tone or a busy tone, depending on the
Call Waiting on VM Group setting on the PBX.