Filter
Top Products
4.3 KX-TDA Series Feature Programming for DPT Integration
108 Installation Manual
4.3.8 Two-way Recording (TWR) Button Assignment
For the Two-way Recording feature to work at an extension, the extension must have a TWR button.
This button must either be a DSS/BLF or CO button with a lamp. Follow the procedure below to assign
a TWR button on an extension. (This is station level programming and should be done at each
individual telephone.) PC programming is also available (see 4.3.12 Button Assignment via PC
Programming).
1. Enter Personal Programming:
While on-hook, press the PROGRAM button.
(Display changes to PT-PGM Mode.)
2. Press the desired Flexible (CO or DSS/BLF) button that you want to assign as the TWR button.
3. Press [90].
Screen output: 2WAY-REC-
4. Enter a Voice Mail floating extension number.
Screen output: 2WAY-REC- _ _ _
(_ _ _ = The Voice Mail floating extension number you entered).
5. Press the STORE button.
6. Press the PROGRAM button or lift the handset to exit the Personal Programming mode.
7. Repeat these steps for each telephone.
4.3.9 Two-way Transfer (TWT) Button Assignment
For the Two-way Transfer feature to work at an extension, the extension must have a TWT button on
it. This button must either be a DSS/BLF or CO button with a lamp. Follow the procedure below to
assign a TWT button on an extension. (This is station level programming and should be done at each
individual telephone.) PC programming is also available (see 4.3.12 Button Assignment via PC
Programming).
1. Enter Personal Programming:
While on-hook, press the PROGRAM button.
(Display changes to PT-PGM Mode.)
2. Press the desired Flexible (CO or DSS/BLF) button that you want to assign as the TWT button.
3. Press [91].
Screen output: 2WAY-Xfr-
4. Enter a Voice Mail floating extension number.
Screen output: 2WAY-Xfr- _ _ _
(_ _ _ = The Voice Mail floating extension number you entered).
5. Press the STORE button.
6. Press the PROGRAM button or lift the handset to exit the Personal Programming mode.
7. Repeat these steps for each telephone.
Conditions: This button must be a flexible (CO or DSS/BLF)
button to be programmed as a TWR button. When all
Voice Mail ports are busy and this key is pressed, the
user will hear a warning tone.