Filter
Top Products
4.9 KX-TA, KX-TD, and KX-TE Series PBX Feature Programming for APT/DPT Integration
Installation Manual 135
4.9 KX-TA, KX-TD, and KX-TE Series PBX Feature
Programming for APT/DPT Integration
The following VPS features are functional on any KX-T7xxx proprietary telephone that is connected
to the PBX.
Programming procedures and availability may vary by country/area, software version, etc.
Refer to the documentation included with the PBX or consult your dealer for more information.
Note for KX-TES824/TEM824 users:
PBX software version 1.0.38 or later is required for APT Integration. Consult your dealer for more
information.
The following users may need to verify the PBX software version. See 4.5.1 KX-TD Series PBX
Programming via the Manager's Extension.
Note for KX-TD1232/KX-TD816 NZ users:
If the PBX software production date is "91213" or later, follow the procedure described below for CE
models.
Note for KX-TD1232RU users:
If the PBX software production date is "90520" or later, follow the procedure described below for CE
models.
Note for KX-TD816RU users:
If the PBX software production date is "90526" or later, follow the procedure described below for CE
models.
4.9.1 Live Call Screening (LCS) Programming
LCS notifies subscribers when messages are being recorded in their mailboxes. 2 notification
methods are available: hands-free or private. Hands-free allows the user to monitor the message as
it is being recorded through the speakerphone and, if desired, intercept the call by lifting the handset.
Private mode notifies the user (by sounding a tone) when a message is being recorded. By pressing
the LCS button, the user can monitor the message and intercept the call by going off-hook. System
Programming also determines whether the VPS continues to record after the user intercepts the call.
4.9.2 Live Call Screening Password Assignment
To allow the Live Call Screening feature to work at an extension, the extension must have the LCS
button lit. To light this button, press the LCS button, then enter the password. This password prevents
others from activating the LCS feature and listening to the messages as they are being recorded. (It
is not necessary to enter PITS Programming to activate this feature.)
PC programming is also available for KX-TD500 and KX-TE users (see 4.9.6 Live Call Screening
Assignment via PC Programming).
1. Lift the handset or press the SP-PHONE button.
2. Enter the feature number.
KX-TD: [799]
KX-TE and KX-TA: [77 ]
3. Enter a 3-digit password ([000]-[999]) 2 times. KX-TE and KX-TA users must then enter [#].
You will hear a confirmation tone, then a dial tone.
Screen output: The 3-digit password you entered is displayed.