Filter
Top Products
4.3 KX-TDA Series Feature Programming for DPT Integration
Installation Manual 103
4.3 KX-TDA Series Feature Programming for DPT
Integration
The following VPS features are functional on any KX-T7xxx proprietary telephone that is connected
to the PBX.
Programming procedures and availability may vary by country/area, software version, etc.
Refer to the documentation included with the PBX or consult your dealer for more information.
4.3.1 Live Call Screening (LCS) Programming
LCS notifies subscribers when messages are being recorded in their mailboxes. 2 notification
methods are available: hands-free or private. Hands-free allows the user to monitor the message as
it is being recorded through the speakerphone and, if desired, intercept the call by lifting the handset.
Private mode notifies the user (by sounding a tone) when a message is being recorded. By pressing
the LCS button, the user can monitor the message and intercept the call by going off-hook. System
Programming also determines whether the VPS continues to record after the user intercepts the call.
4.3.2 Live Call Screening Password Assignment
To allow the Live Call Screening feature to work at an extension, the extension must have the LCS
button lit. To light this button, press the LCS button, then enter the password. This password prevents
others from activating the LCS feature and listening to the messages as they are being left. (It is not
necessary to enter Personal Programming to activate this feature.) PC programming may also be
used to program this feature (see 4.3.6 Live Call Screening Assignment via PC Programming).
Note
• For KX-TDA series PBXs, the term "Live Call Screening Password" used in this section
indicates the Extension PIN (Personal Identification Number).
1. Lift the handset or press the SP-PHONE button.
2. Enter [799].
3. Enter [1].
Screen output: Enter PIN
4. Enter a password (max. 10 digits), then press [#].
Screen output: Enter PIN Again
5. Re-enter the password, then press [#].
You will hear a confirmation tone, then a dial tone.
Screen output: PIN set
6. Hang up or press the SP-PHONE button.