Filter
Top Products
4.3 KX-TDA Series Feature Programming for DPT Integration
104 Installation Manual
4.3.3 Live Call Screening Password Cancelling
To cancel the password, follow the procedure below. (It is not necessary to enter Personal
Programming to activate this feature). PC programming is also available (see 4.3.6 Live Call
Screening Assignment via PC Programming).
Note
• The term "Live Call Screening Password", used in KX-TA/KX-TD series PBXs, has the same
meaning as "Extension PIN (Personal Identification Number)" used in KX-TDA series PBXs.
For more information, refer to the KX-TDA series manuals.
1. Lift the handset or press the SP-PHONE button.
2. Enter [ 799].
3. Enter [0].
Screen output: Enter PIN
4. Enter the extension's password.
You will hear a confirmation tone, then a dial tone.
Screen output: PIN cleared
5. Hang up or press the SP-PHONE button.
4.3.4 Live Call Screening Recording Mode Assignment
This program allows the VPS to continue recording the conversation in the mailbox after the extension
intercepts the call during the Live Call Screening. (This is station level programming and should be
done at each individual telephone.)
1. Enter Personal Programming:
While on-hook, press the PROGRAM button.
(Display changes to PT-PGM Mode.)
2. Enter [26].
Screen output: Rec. after LCS
3. Press the ENTER button.
4. Press the SELECT button (AUTO ANSWER) until the desired selection is displayed.
Screen output: Stop Record/Keep Record
5. Press the STORE button.
6. Press the PROGRAM button or lift the handset to exit the Personal Programming mode.
7. Repeat these steps for each telephone.