Filter
Top Products
4.7 KX-TA Series PBX Programming for APT Integration
130 Installation Manual
From the SYS-PGM NO ? screen:
a) Enter [130] (for VPS1) or [131] (for VPS2).
b) Press the NEXT button (SP-PHONE).
Screen output: Disable
c) Press the SELECT button (AUTO-ANSWER).
Screen output: Port 7 or Port 15
d) To assign 2 jacks, press the SELECT button (AUTO-ANSWER) again.
Screen output: Port 7 & 8 or Port 15 & 16
To assign 1 jack, skip this step.
e) Press the STORE button.
f) Press END (HOLD).
5. Select the appropriate trunk feature settings depending on how your customer plans to use the
VPS: a) to answer all incoming calls, b) as an operator backup, or c) to only answer calls not
answered by user extensions.
Recommended trunk feature settings:
a) If the VPS is answering all incoming calls:
Trunk Mode —Use System Programs [414] (Day Mode), [415] (Night Mode), [416]
(Lunch Mode) to each trunk to "DIL" mode, and assign the first extension of the Voice
Conditions: The lowest jack (jack 07 or jack 15) entered here must
be connected to Port 1 of the VPS.
To change the current assignment from "Port 7" to
"Port 7 & 8", you must first change it to "Disable".
Likewise, if you want to change it from "Port 7 & 8" to
"Port 7", you must first change it to "Disable". If the
current assignment is already "Disable", you can
make a change in 1 step. This condition also applies
to System Program [131].
When "Port 7 & 8" is selected in program [130],
extension jack numbers 07 and 08 will be in
extension group 7 automatically. Likewise, when
"Port 15 & 16" is selected in program [131], extension
jack numbers 15 and 16 will be in extension group 8
automatically. Also the Extension Hunting type is set
as "Circular" automatically in each of these 2
extension groups.
Extension
group 8
KX-TE or
KX-TA
Series PBX
15
16
Port 1
Port 2
VPS 2
7
8
Port 1
Port 2
VPS 1
Extension
group 7