Filter
Top Products
9
Welcome!
Loading the operating system
LOADING THE OPERATING SYSTEM
Your Pa50SD can be constantly updated as new versions of
the operating system are released by KORG. You can down-
load the operating system from www.korgpa.com. Please,
read the Readme file included with the operating system
itself.
You can see which version of the operating systems is
installed in your Pa50SD by keeping the SHIFT button
pressed, and pressing the ENTER and EXIT buttons together.
The operating system version number will appear in the dis-
play. Press EXIT to close the message window.
To load a new system, follow these instructions:
1. Copy the three operating system’s files in the root of an
SD card. These are the needed files:
• BPa50SD.Sys
• NBPa50SD.Sys
• OsPa50SD.lzx
2. Turn the instrument off, and insert the card containing
the operating system into the card drive.
3. Turn the instrument on. A message appears in the dis-
play, asking if you want to load the operating system.
4. Press ENTER to load, or EXIT to cancel the loading pro-
cedure. If you press ENTER, wait until the loading is fin-
ished.
When the operating system is finished loading, a mes-
sage appears, asking you to remove the card and press
any button.
Hint: When done, delete the operating system files, to
avoid Pa50SD starts the upgrade procedure each time it is
turned on with the same card in the drive.
5. Remove the card, and press any button.
RELOADING THE FACTORY DATA
Should the internal memory content get damaged, you can
reload the original Factory Data from the backup card. See
“Restore Data” on page 141.