Filter
Top Products
130
Card Edit environment
The WRITE/CARD IN USE LED
16. CARD EDIT ENVIRONMENT
The Card Edit environment is the place where you can man-
age files. This edit environment overlaps the current operat-
ing mode (Style Play, Song Play, Backing Sequence, Song,
Program).
THE WRITE/CARD IN USE LED
When the drive is reading or writing data on a card, the
WRITE/CARD IN USE indicator lights up. While in a Card
page, the “Wait” message appears in the display; in this situa-
tion, you can’t select a different Card page (you can, however,
select a different operative mode).
Warning! Never remove a card when the WRITE/CARD IN
USE LED is turned on!
SUPPORTED CARDS
You can use the following types of cards to save or load data
to and from the Pa50SD’s internal memory:
• SD (High Speed, Ultra II, SDHC)
• MMC
• MicroSD with an SD adapter
• MiniSD with an SD adapter
Note: Before you can use the SD/MMC card, you must format it on
the Pa50SD. Don’t use your computer or digital camera to format
(initialize) a card you plan to use with the Pa50SD. If the card was
formatted on a different device, it may not work correctly with the
Pa50SD
Note: The SD/MMC card is not included. It must be purchased
separately.
Note: The Pa50SD supports SD cards with a power supply voltage
of 2.7–3.6V.
SD and MMC card handling
• Do not remove the card from the drive while the Pa50SD is
reading or saving data.
• The SD/MMC card may be hot immediately following use.
Power-off the Pa50SD and wait for the card to cool before
removing it.
• SD/MMC cards are precision parts. Do not bend them,
drop them, or subject them to physical shock.
• Avoid using or storing SD/MMC cards in locations of
extremely high or low temperature such as in direct sunlight,
a closed automobile, or near a heater, or in locations of high
humidity or excessive dust.
• Avoid using or storing SD/MMC cards in locations where
they may be subject to strong static electricity or electrical
noise.
• Do not allow dirt or foreign matter to adhere to the contacts
of an SD/MMC card. If the contacts should become soiled,
gently wipe them off using a dry cloth.
• When you are not using an SD/MMC card, keep it in the
protective case that was included with the card to prevent it
from being damaged by static electricity.
• Do not leave an SD/MMC card where it is accessible by
infants or children who might place it in their mouth and
swallow it.
• Carefully read and observe the owner’s manual included
with your SD/MMC card.
Write protecting an SD card
SD cards have a write protect switch that prevents the data
from being overwritten accidentally and lost. If you set the
card’s switch to the protected setting, it will be impossible to
write or erase data on the card, or to format it. If you need to
save edited data on the card, move the switch back to its orig-
inal unprotected setting.
Inserting/exchanging cards
Inserting a card
Insert the card, making sure that it is oriented correctly. The
gold contacts should be facing down, and the angled corner
to your right.
Removing a card
Press the card inward and release it, and the card will pop
out.
Note: Before you can use an SD card, you must format it on the
Pa50SD. The card may not work if it was formatted on another
device.
Organizing your data into separate folders
We suggest to organize your data into separate folders,
instead of saving many files into the root (i.e., the main level)
of the card. This allows for faster accesses to the card, thus a
quicker response of the Pa50SD to your CARD commands.
ALL |
|
SD SAVE OPEN CLOSE
Card:Save |Wait
Write-protect
switch
Protected
SD card slot
SD card
Card-ENG.fm Page 130 Thursday, March 19, 2009 5:24 PM