Filter
Top Products
141
Card Edit environment
Page 9 - Utilities 2
Backup Data
This command starts a backup of all internal factory data
(Styles, Programs, Performances…) excluding the Operating
System itself.
Note: Should you not do a back-up and your internal data is
changed, you can download the data from www.korgpa.com, or
ask your local KORG dealer.
1. Select the Backup Data command.
2. The “Are you sure?” message appears. Press ENTER to
continue, EXIT to abort.
If the card is not formatted, Pa50SD asks if you want to
format it:
Keep SHIFT pressed, and press ENTER to format the
card.
Restore Data
This command restores the backup of the internal factory
data, executed with the “Backup Data” command.
Note: Should your Factory Data card become corrupt, you can
download the data from www.korgpa.com, or ask your local
KORG dealer.
Warning: Don’t play on the keyboard while restoring data, and
stay in the Card mode. Wait until the “Wait” message disap-
pears, and the WRITE/CARD IN USE LED turns off.
1. Prepare a card containing the Backup folder and insert it
into the drive.
2. Select this command.
3. The “Are you sure?” message appears. Press ENTER to
continue, EXIT to abort.
4. Wait until the backup card has been read.
5. When the Wait message has disappeared, and the
WRITE/CARD IN USE LED has turned off, turn the
instrument off, then on again.
Note: At the end of a Restore Data operation, the “Some files
missing” error message may appear. This is due to the lack of
Performance banks 11-20 on older versions of the operating sys-
tem of Pa80, whose data you are probably reading. However,
this is not a problem. Press EXIT to close the message window.
PAGE 9 - UTILITIES 2
This page includes the Protect functions.
Global Protect
When loading a “.SET” file, this parameter (if On) protects
the Global from being reprogrammed by the loaded data. All
Global parameters are therefore left unchanged.
When loading a single “.GLB” file, this parameter is ignored,
and the Global is overwritten by the loaded data.
Note: This parameter is automatically set to Off when turning
the instrument off.
Factory Style Protect
When On, this parameter protects the Factory Styles (from
the “8 BEAT/16 BEAT 1” to the “TRADITIONAL” bank)
from being overwritten when loading data from card. Fur-
thermore, you can’t access these banks when saving data.
When Off, you can load or save User Styles even into the Fac-
tory Styles banks (from “8 BEAT/16 BEAT 1” to “TRADI-
TIONAL”). This way, you can personalize your Factory Style
banks.
Please note that the Save All procedure always saves only the
USER Style banks.
Note: This parameter is automatically set to On when turning
the instrument off.
Note: Should your accidentally delete some Factory Data,
reload the Backup data, contact your KORG dealer or service
center, or download the data from www
.korgpa.com.
No Card/Unformatted
Sh+Enter to format
Global Protect:Off
Fact.Style Protect:On
Card:Util 2
Card-ENG.fm Page 141 Thursday, March 19, 2009 5:24 PM