Filter
Top Products
72
Song Play operating mode
The Write window
100 The quantize window extends to the nearest
window; all events are quantized.
THE WRITE WINDOW
You can save onto the internal memory a Seq1+Seq2 Setup.
There is a separate Setup for each of the two onboard
sequencers.
This Setup memorizes the Internal FX settings, the Internal/
External status of each track, and the Play/Mute status of
each track. When a new Song is selected, the saved Setup is
automatically recalled, and all parameters are reset.
• Globally setting the Internal FX parameters allows you,
for example, to assign to all Songs a Reverb suitable for
the venue where you are performing, without having to
modify any of the Songs. (This is true only for non-
Pa50SD/80 Songs).
• Globally setting the Internal/External status allows you,
for example, to send the Piano track of all Songs to a
dedicated expander (just set globally the Piano track to
the External mode).
• The Play/Mute status allows you to globally mute tracks
that you don’t want to play during a show, for example
the melody track. (This is ture only for non-Pa50SD/80
Songs).
For more information on the Internal FX settings for the
Song Play mode, see “Page 3 - Mixer: FX send A/B” or “Page
3 - Mixer: FX send C/D”, and following, on page 76.
Here is the procedure to save the Seq1+Seq2 Setup in mem-
ory.
1. Press WRITE. The Write page appears.
2. Press ENTER to confirm, or EXIT to abort.
If you confirm, the Setup is saved into the Global. You
may then save this Setup on the card together with the
Global data.
MAIN PAGE
Press SONG PLAY to access this page from another operating
mode.
Note: When switching from Style Play to Song Play, the Song
Setup is automatically selected, and various track parameters
may change.
Press EXIT/NO to access this page from the Menu or any of
the Song Play edit pages.
To see the Song’s tracks, use the TRACK SELECT button to
switch from the main page (showing the Realtime tracks), to
the other tracks. Pressed a first time, you will see tracks 1-8
(enlightened TRACK SELECT LED); a second press will
show tracks 9-16 (flashing TRACK SELECT LED); pressed
again, you will go back to the Realtime tracks (TRACK
SELECT LED switched off).
Song Play icon
When on, this icon shows that the instrument is in Song Play
mode.
Page header
This line shows the currently selected sequencer, and the
assigned Song (“S1:Song Name” or “S2:Song Name”).
When no Song is assigned to the current sequencer, this line
shows only the selected sequencer number (“S1:” or “S2:”,
depending on the selected sequencer).
When no sequencer or Song is selected, only the “No Song”
text appears.
Press either A (S1:) or B (S1:) to switch between Sequencer 1
and Sequencer 2. When one of the sequencers is selected, the
sequencer number is also shown at the right of the metro-
nome Tempo.
When a Jukebox file is in play, its name appears on the page
header.
Selected Sequencer
These indicators show if the currently selected sequencer is
Seq1 or Seq2. Use the A and B VOLUME/VALUE buttons to
select a sequencer.
Win=0
Win=50
Win=100
Press 'Enter/Yes'
to memorize
the Seq 1/2 Setup
WRITE:
S1: Piano01
S2: Guitar01
Lyrics StrngEns2
VoxPad1
No song
Song Play icon
Page header
Realtime (Keyboard) tracks
Song select commands
Selected Sequencer
Measure number