Filter
Top Products
79
Song Play operating mode
Page 9 - Jukebox
PAGE 9 - JUKEBOX
The Jukebox function lets you play a list of Songs (127 max),
at the simple touch of a button. You can play a Jukebox file by
selecting it in the Song Select page (see “Playing a Jukebox
file” on page 74), just as if it was a normal Song.
In this page, you can create, edit and save a Jukebox file. If a
Jukebox file is already selected into a Sequencer, you will
enter this page with that file ready to be edited. Otherwise,
you will enter this page with an empty “NEW_NAME.JBX”
file.
To create a new file, even when a Jukebox file is already
selected, press SHIFT+ F4 (Del), and confirm with ENTER
(see below the “F4 (Del)” paragraph).
When you press PLAY/STOP from this page, the Jukebox
playback begins from the currently selected Song (i.e., the
Song on the fist line of the display).
F1 (Save)
Press this button to save the Jukebox file to the card. The
Jukebox Save page appears, allowing you to save your file to
the card.
Note: You can save your “.JBX” file only in the same folder as
the Songs in the list.
You can create a new file, or overwrite an existing one.
1. Move to the first line of the display the “.JBX” file you
want to save your list into. Select an existing file if you
want to overwrite it. Select the “NEW_NAME.JBX”
item to create a new file.
Use the E-F (Scroll Up) and G-H (Scroll Down) VOL-
UME/VALUE buttons, or the TEMPO/VALUE controls
to scroll the list.
2. If you are making a new file, when the
“NEW_NAME.JBX” item is on the first line of the dis-
play, press one of the A VOLUME/VALUE buttons. You
are prompted to assign a name to the selected item:
3. Move the cursor using the DOWN/- and UP/+ buttons.
Select a character using the DIAL. Insert a character at
the cursor position by pressing the INSERT button.
Delete a character at the cursor position by pressing the
DELETE button.
4. When you have finished writing a name, press F2 (Save)
to confirm. The “Are you sure?” message appears. Press
ENTER to confirm, EXIT to abort.
F2 (Add)
Adds a Song at the end of the current list. You can add up to
127 Songs in a list.
Note: A Jukebox list can include only Songs contained in the
same folder.
F3 (Ins)
Inserts a Song at the cursor position (i.e., the first line of the
display). All subsequent Songs are moved to the next higher-
numbered slot. You can add up to 127 Songs in a list.
Note: A Jukebox list can include only Songs contained in the
same folder.
F4 (Del)
This command let’s you delete the Song on the first line of the
display.
Pressed while keeping SHIFT pressed, the whole
Jukebox list is deleted. (The instrument asks for a confirma-
tion with the “Are you sure?” message; press ENTER to con-
firm, EXIT to abort).
The Jukebox file name changes to “NEW_NAME.JBX”.
PAGE 10 - PREFERENCES
In this page, you can set various general parameters.
Use the A-D VOLUME/VALUE button pairs to select a
parameter.
Note: These settings are stored in the Global file. After changing
these settings, press WRITE to save them into the Global. The
Write Global window will appear (see “The Write window” on
page 72).
Note: You can always start both sequencers simultaneously.
Start both sequencers simultaneously by keeping SHIFT held
down while pressing one of the PLAY/STOP controls.
Link Mode
The two onboard Sequencers can work each with a different
Tempo (Off), or use the same Tempo (Link modes).
Off The sequencers Tempo are not linked. Each
sequencer uses its own Tempo.
Link Measure
The two sequencers Tempo are linked together.
The Tempo data written into the Songs are
ignored. Adjust the Tempo using the TEMPO/
VALUE controls.
Start one of the sequencers, by pressing its own
PLAY/STOP control. Then, start the other
sequencer, by pressing the other PLAY/STOP
control; the second sequencer starts at the next
measure.
01 Sunday.mid |
02 Likeavrg.mid
|
SAVE ADD INS DEL
JB List:NEW_NAME
NEW_NAME.JBX |
MEDLEY1.JBX
|
SD SAVE ABORT
JBX Save
NEW_NAME
Link Mode:Off
S2 FX Mode:CD
Perf. FX Mode:CD
Preferences (Gbl)