Filter
Top Products
182
Effects
Filter/Dynamic
When “LFO Waveform” is set to Random, the “LFO Step
Freq” parameter uses a random LFO cycle.
b: LFO Phase [degree]
Offsetting the left and right phases alters how modula-
tion is applied to the left and right channels, creating a
swelling affect.
e: BPM, f: Step Base Note, f: Times
The width of an LFO step, or a cycle of random LFO, is
obtained by multiplying the length of a note (
…)
(selected for “Step Base Note”, in relation to the tempo
specified in “BPM,” or the MIDI Clock tempo if “BPM” is
set to MIDI) by the number specified in the “Times”
parameter.
j: Wet/Dry
The effect sound’s phase will be reversed when you set
this parameter in the range of values from –Wet to –1:99.
011: Excit/Enhan
(Stereo Exciter/Enhancer)
This effect is a combination of the Exciter, which adds a
punch to the sound and the Enhancer, which adds spread and
presence.
a: Exciter Blend
This parameter sets the depth (intensity) of the Exciter
effect. Positive values give a frequency pattern (to be
emphasized) different from negative values.
b: Emphatic Point
This parameter sets the frequency to be emphasized.
Higher values will emphasize lower frequencies.
c: Enhancer Dly L [msec], d: Enhancer Dly R [msec]
These parameters set the delay time for the Enhancer left
and right channel. Specifying a slightly different delay
time for the left and right channel will add a stereo
image, depth, and width to the sound.
Random Filter LFO
LFO Step Freq
LFO Frequency
LFO Step Freq
Step-Tri
Random
LFO Phase
0 +90
+180 [degree]
0 [degree]
–90
–180
a
Exciter Blend
Sets the intensity (depth) of the Exciter effect
–100...+100
☞,
Src Off...Tempo
Selects the modulation source of the Exciter intensity
Amt –100...+100
Sets the modulation amount of the Exciter intensity
b
Emphatic Point
Sets the frequency to be emphasized
0...70
☞,
Src Off...Tempo
Selects the modulation source of the frequency to be emphasized
Amt –70...+70
Sets the amount of modulation of the frequency to be emphasized
c
Enhancer Dly L (Enhancer Delay L) [msec]
Sets the delay time for the Enhancer left channel
0.0...50.0msec
☞
d
Enhancer Dly R (Enhancer Delay R) [msec] 0.0...50.0msec
Sets the delay time for the Enhancer right channel
☞
e
Enhancer Depth 0...100
Sets the determines to what degree the Enhancer effect is applied
Src Off...Tempo
Selects the modulation source of the Enhancer width
Amt –100...+100
Sets the modulation amount of the Enhancer width
f
EQ Trim
Sets the 2-band EQ input level
0...100
g
Pre LEQ Gain [dB]
Table , “Sets the gain of Low EQ,” on page 176
–15.0...+15.0dB
Pre HEQ Gain [dB]
Table , “Sets the gain of High EQ,” on page 176
–15.0...+15.0dB
h
Wet/Dry Dry, 1:99...99:1, Wet
Table , “Sets the balance between the effect and dry sounds,” on page 175
Src Off...Tempo
Table , “Selects the modulation source of the effect balance,” on page 175
Amt
Table , “Sets the modulation amount of the effect bal-
ance,” on page 175
–100...+100
Left
Right
Wet / Dry
Wet / Dry
Stereo In - Stereo Out
EQ Trim
LEQ HEQ
EQ Trim
Delay
Delay
Depth
D
-mod
Exciter
Exciter
Enhancer