Filter
Top Products
Simple recording method
With EASY COMPOSER you can easily create a unique rhythm pattern by selecting a different style for
each part of the rhythm.
1. On the COMPOSER MENU display, select
EASY COMPOSER.
• The display looks similar to the following.
2. Use the MEM ∧ and ∨ buttons to select the
memory in which to record your rhythm.
• Select from A-vari 1 to 4, B-vari 1 to 4 and
C-vari 1 to 4.
3. Use the PART ▲ and ▼ buttons to select the
part.
• In the EASY COMPOSER, the new rhythm
pattern is divided into 9 parts, to each of which
a style and variation is assigned.
4. Use the STYLE ∧ and ∨ buttons to select a
style.
5. Use the VARI ∧ and ∨ buttons to select the
variation number.
• The number of variations differs depending on
the selected style.
• A part which is set to OFF does not sound.
Note that the “BsDrum&Snare” part cannot be
set to OFF.
6. Repeat steps 3 to 5 to select styles for the
other parts.
7. Press the SET button.
• The rhythm pattern is played back.
• If you are not satisfied with the rhythm pattern,
repeat steps 3 to 7.
• If you wish to correct the sounds or phrases
in your rhythm pattern, press the EDIT button.
The display changes to the recording display.
(Refer to page 112.)
• For playback, refer to page 115.
Create a completely new rhythm
Clear the memories and compose a completely new rhythm from scratch.
• You can also use this method when copying a pattern from a preset rhythm or the SEQUENCER.
Prepare to record
1. On the COMPOSER MENU display, select a
memory in which to record (RECORDING
MEMORY A, B, or C).
• The display looks similar to the following.
2. Use the buttons below the display to select
the pattern you want to create.
• If the MEMORY CLR button is pressed, all the
current contents of the MEMORY are erased
(a confirmation display appears).
• If the DSP SET button is pressed, the display
changes to the ACCOMP DSP setting display.
(Refer to page 115.)
• You can press the NAMING button and assign
a name to the MEMORY.
Composer
Part V Composer
110
QQTG0671