Filter
Top Products
ORIGINAL tuning
Each instrument of each sound has its own orig-
inal tuning data. This setting affects the tuning
curve that spans the entire keyboard. So, for ex-
ample, the acoustic piano-type sounds duplicate
those of a real piano, in that the high notes are
tuned slightly higher and the low notes slightly
lower.
You can specify for each part whether this orig-
inal tuning is enabled or not.
1. Use the PART SELECT ∧ and ∨ buttons to
select a part.
2. Use the ORIGINAL TUNING ON/OFF button
to select ON or OFF.
Sound Load Option
The data for each individual sound is set with the most suitable effect settings, etc., but in some cases
when switching from one sound to another and these settings are recalled, the setup is not the way you
want it. By using the SOUND LOAD OPTION, you can adjust the settings so that specific data is not
recalled.
1. On the SOUND MENU display, select SOUND
LOAD OPTION.
• The display looks similar to the following.
2. Use the ▲ and ▼ buttons to select an item.
Use the ∧ and ∨ button to set the filter to ON
or OFF.
Monitor Setting
When the external speakers are connected to the instrument’s output terminals for use on the stage,
etc., the instrument’s speakers can be turned off as desired.
1. On the SOUND MENU display, select MONI-
TOR SETTING.
• The display looks similar to the following.
2. Press the OFF button.
• The speakers are turned off.
• Press the ON button to turn the speakers on.
• The speakers are turned on whenever the
power is turned on.
• Note that, when the speakers are turned off,
the headphone output is also turned off.
• When the speakers are turned off, a MONI-
TOR OFF indication is shown in the upper part
of the normal display.
Sound
Part VIII Sound
160
QQTG0671