Filter
Top Products
Pattern Copy
Use this function to copy a pattern from a rhythm or from SEQUENCER data.
PATTERN COPY
Copy a rhythm to the COMPOSER.
• You can also copy a pattern from the
MEMORY.
1. On the COMPOSER MENU display, select
PATTERN COPY.
• The display looks similar to the following.
2. Select the pattern you wish to copy.
• In the FROM box, specify the settings with the
corresponding buttons.
GROUP: Group name
RHYTHM: Rhythm name
PATTERN: Pattern name
• If ALL is selected, all the patterns are
copied.
3. Select the memory you wish to copy to.
• In the TO box, specify the settings with the
corresponding buttons.
MEMORY: Memory name (A, B or C)
PATTERN: Pattern name
• If ALL is selected, all the patterns are
copied.
4. Use the ACCOMP DSP ∧ and ∨ buttons to
specify whether or not the DSP effect settings
at the source are also copied. (when the PAT-
TERN was not set to ALL)
OFF:
The settings are not copied.
PART SETTING:
Only the part settings are copied.
TYPE & PART SETTING:
The DSP settings and part settings are
copied.
5. Press the OK button.
• When copying has been successfully
completed, “COMPLETED!” appears on the
display.
• The DSP settings are the same as those in
the MEMORY. For this reason, except for ALL
copy, the settings may change and cause the
sound nuance to change as well.
• If you wish to use the COMPOSER functions
to edit the copied data, press the EDIT button,
and follow the procedure to record a pattern.
Copying one part at a time.
1. Use the PAGE ∧ and ∨ buttons to select PAGE
2/2.
• The display looks similar to the following.
2. Use the MEM ∧ and ∨ buttons to specify the
pattern to copy to.
3. Use the PART ▲ and ▼ buttons to specify the
part you wish to copy to.
4. On the FROM side, use the buttons to specify
the part to copy from.
• For the DRUM part you can specify the
DRUMS 1 or 2 part; for other parts you can
specify a part other than a DRUMS part.
5. On the TO side, use the FUNC ∧ and ∨ buttons
to specify for each part whether or not to copy
the data.
KEEP:
Part data is not copied.
CLEAR:
Part data is erased.
COPY:
Part data is copied.
6. Press the OK button.
Composer
Part V Composer
119
QQTG0671