Filter
Top Products
Punch Record
If you make a playing error during REALTIME RECORD or would like to change the recording for some
other reason, you can use the punch recording feature to correct a selected portion of the performance
without having to redo the whole part.
1. On the SEQ MENU display, use the SONG
SELECT ∧ and ∨ buttons to select the song
number. Then select RECORD & EDIT.
2. On the RECORD & EDIT display, select
PUNCH RECORD.
• The display looks similar to the following.
3. Select the track which contains the portion you
want to correct.
• You cannot select a track in which no data is
stored.
• On the display “REC” indicates tracks which
are being recorded, and “PLAY” indicates
tracks which are being played back.
4. Use the MEAS ∧ and ∨ buttons to specify the
beginning measure of playback.
• “MEASURE=” indicates the current measure
number.
5. Press the START/STOP button to begin play-
back of the specified track.
6. During playback, press the PUNCH IN button
at the point you want to begin recording.
• Recording begins as soon as the PUNCH IN
button is pressed. Begin playing at this point.
• The REC indication changes to the PUNCH
indication.
• The PUNCH IN button switches to the REC
STOP button.
7. Press the REC STOP button at the point you
want to stop recording.
• Punch recording stops immediately.
• You can also begin punch-in recording by play-
ing the keyboard.
• You can specify the punch-in/punch-out points
with the optional Foot Switch (sold sepa-
rately). (Refer to page 179.)
AUTO PUNCH RECORD
You can also set the punch-in and punch-out
points beforehand, so that recording automat-
ically begins and ends at the specified points.
1. On the PUNCH RECORD display, press the
AUTO: OFF button.
• The display looks similar to the following.
2. Use the FIRST MEASURE ∧ and ∨ buttons
to specify the number of the punch-in
measure.
3. Use the LAST MEASURE ∧ and ∨ buttons to
specify the number of the punch-out measure.
• The number of the LAST measure must be
higher than the number of the FIRST measure.
• The specified measure is recorded.
Recording the performance
Playing error
Punch out
Recording mode
Playback
Punch in
Replay this portion
Sequencer
Part IV Sequencer
87
QQTG0671