Filter
Top Products
Saving data
The recorded data and panel settings of this instrument can be saved on a disk.
Disks
You can use 3.5 inch 2DD (720KB) or 2HD
(1.44MB) disks.
• How to distinguish the two disk types:
• Although 2HD disks can hold more data and
are convenient for quick loading and saving,
some models may be able to read only 2DD
disks. Therefore, you may not be able to use
your 2HD disk data with other musical instru-
ment models.
• When saving data to the disk, the write-protect
tab must be closed.
FORMAT
Disks which are used for the first time with this
instrument have to be formatted through the fol-
lowing procedure. When an unformatted disk is
inserted into the Disk Drive slot and you attempt
to execute the save or load procedure, the DISK
FORMAT display appears. Follow the instruc-
tions shown to format the disk.
• Note that this procedure clears any data which
is currently stored on the disk.
1. Select the type of format (2DD or 2HD).
• Be sure to select the type which is the same
as your disk type.
• If the type is automatically detected, the dis-
play changes directly to the following display,
without showing the type select display.
• The display looks similar to the following.
• If you wish to select the type again, use the
PAGE button to access the PAGE 2/2 display.
2. Press the YES button to format the disk, or
press the NO button to cancel the format.
• When the YES button is pressed, disk format
begins. After about 1– 2 minutes, formatting is
completed and DISK NAMING display is
shown.
3. Use the buttons below the display to assign a
name.
• Press a button for the corresponding letter.
Press the SHIFT button to display numbers.
• Press the POSITION button to move the cur-
sor.
• You can also use the TEMPO/PROGRAM dial
to select the characters.
• Press the INS button to enter a space at the
cursor position.
• Press the DEL button to erase the character
at the cursor position.
• Press the CLR button to erase the entire
name.
• Press the →← button to center the name.
4. Press the OK button.
• The FORMAT display can also be accessed
from the DISK TOOLS menu when, for ex-
ample, you wish to reformat a disk. (Refer to
page 135.)
2HD2DD
No hole
Hole
Storage is not
possible
Storage is
possible
Open Closed
Disk Drive
Part VI Disk Drive
130
QQTG0671