Filter
Top Products
Overall Touch Sensitivity
This instrument features INITIAL TOUCH (the volume, for example, changes depending on how hard
the keyboard is played) and AFTER TOUCH (effects are added by pressing the keys harder).
1. On the CONTROL MENU display, select
OVERALL TOUCH SENSITIVITY.
• The display looks similar to the following.
2. Use the ▲ and ▼ buttons to select the function.
INITIAL TOUCH
VELOCITY SENSE:
Adjust the amount of keyboard touch response
(0 to 9).
• When set to 0, initial touch sensitivity is turned
off.
AFTER TOUCH
ON/OFF:
Enable or disable the aftertouch effect for the
keyboard (ON/OFF).
CURVE:
Adjust the curve of the sound change relative
to how hard the keys are pressed (1 to 10).
THRESHOLD:
Specify how hard a key must be pressed to
produce the effect (1 to 127).
• The higher the value, the hard the key must
be pressed to produce the effect.
3. Use the ∧ and ∨ buttons to change the set-
tings.
Foot Controllers
If an optional Foot Switch and/or Expression Pedal (sold separately) is connected, you can assign it one
of several functions, allowing convenient and fast control during your performance.
1. On the CONTROL MENU display, select
FOOT CONTROLLERS.
• The display looks similar to the following.
2. Use the CONTROLLER ▲ and ▼ buttons to
select a switch name, and the FUNCTION ∧
and ∨ buttons to select its function.
FOOT SWITCH
OFF:
No function is assigned.
SOFT:
Soft on/off
SOSTENUTO:
Sostenuto on/off
P. MEM INCREMENT:
Increment the PANEL MEMORY number
selection by 1.
P. MEM DECREMENT:
Decrement the PANEL MEMORY number
selection by 1.
P. MEM BANK INC.:
Change to the next PANEL MEMORY bank in
order.
Control
Part XI Control
179
QQTG0671