Filter
Top Products
FILTER ENVELOPE TOUCH & KEY FOLLOW
Specify how the filter envelope (curve) changes
relative to touch or note pitch.
1. Use the PAGE buttons to view the 4/4 display.
• The display looks similar to the following.
2. Use the buttons to the left of the display to
select a tone.
3. Use the TOUCH ∧ and ∨ buttons to modify
how the respective filter envelopes change
relative to touch.
• Use the TIME ∧ and ∨ buttons to specify the
time change, and the LEVEL ∧ and ∨ buttons
to specify the level, relative to touch.
• At a – setting, the softer the keys are played,
the greater the change. At a + setting, the
harder the keys are played, the greater the
change.
4. Use the ENVELOPE KEY FOLLOW ∧ and ∨
buttons to modify how the respective filter en-
velopes change relative to note pitch.
• Adjust the respective slopes for attack (ATK),
decay (DCY) and release (RLS). Use the CEN-
TER ∧ and ∨ buttons to specify the center of
the bend slope by note name.
Amplitude Edit
Adjust the settings related to the volume of the sound.
LEVEL
1. On the SOUND EDIT menu, select AMPLI-
TUDE.
• The display looks similar to the following.
2. Use the buttons to the left of the display to
select a tone.
3. Use the LEVEL ∧ and ∨ buttons to select the
volume.
4. Use the TOUCH ∧ and ∨ buttons to set the
amount of volume change in relation to how
hard the keyboard is played.
• At a – value, the softer the keyboard is played,
the louder the sound. At a + value, the harder
the keyboard is played, the louder the sound.
5. Use the CURVE ∧ and ∨ buttons to select the
type of volume curve depending on touch.
6. Use the LEVEL KEY FOLLOW ∧ and ∨ but-
tons to change the respective key follow set-
tings.
• Use the SLOPE ∧ and ∨ buttons to adjust the
bend slope. Use the RANGE ∧ and ∨ buttons
to specify the pitch range by note name.
7. Repeat steps 2 to 6 for the other tones, as
desired.
Sound Edit
Part X Sound Edit
172
QQTG0671